Status
Not open for further replies.

CASPER

New member
Sv8000 UD Error fix

Some people have asked for this so here is a possible fix for UD Error on SV8000

1. Copy HD8000_V0211.rom and HD8000_BOOT_v0200.ldr onto the USB memory stick
(make sure to format the USB memory stick prior doing update)

2. Turn SV-HD8000 OFF completely, including the rear power switch

3. Plug the USB memory stick into SV-HD8000 USB port

4. Update "HD8000_V0211.rom" by hard update
(Press and Hold front panel Menu button, at the same time turn the rear power switch ON, when you see it start loading you can release the menu button)

5. Ignore "UD ERROR" message during update. (It can be wrong message)

6. Check if the receiver is booting correctly, if not after 5min, turn OFF and ON by using the rear power switch

7. Go in to Menu and check if the current Main SW version is 02.11

8. Now go to USB Menu, update bootloader with "HD8000_BOOT_v0200.ldr" and you are done .
 

Attachments

  • HD8000_V0211_UD_ERROR.zip
    3 MB · Views: 32
Status
Not open for further replies.
Top