AzBox HD Premium Mullticas v 170
MultiCAS
-DATE: 2011/05/18
-Version: v1.70
-----------------------------------------------
ADD: Added BISS key (See include new_biss.key and below)
- The channel Al Jazeera (Eutelsat W4 / 7 @ 36 ° E)
ADD: High Re-Sharing (Share via local CCcam, see below)
--- How to use Re-Sharing CCcam share ---
Use an account for more Azbox CCcam with MultiCAS
1. Azbox connected to the server CCcam
a. Get Account CCcam.
b. Go to the plug-ins-> OpenXCAS-> Splitter MultiCAS smart cards and CS Menu
c. Select the mode as a server and configure the submenu as follows;
- My IP address: this is the IP address of your Azbox. This will be the IP address of the server to the client.
- Port: 3000 (default) - Please, set between 1000 and 9000.
- Standby time: 2.0 seconds (default). If you use more customers this timeout value should be higher. Please keep below 4.0 seconds.
- Save the modified values by pressing the red button on the remote control.
2. Customer Azbox
a. Go to the plug-ins-> MultiCAS OpenXCAS-> Splitter and smart cards and CS Menu
b. and select the mode as client and configure the submenu as follows;
- Domain Name Server for use: OFF (or ON, if you use DNS.)
- Server IP Address: Set the IP address of the STB.
- Domain Name Server: If use of the domain name server is on, put the domain name.
(If using local shared between Azbox at his home in the server's IP address will be like 192.168.xxx.xxx)
- Port: 3000 (default) - please set the same value with the STB server.
- Standby time: 1.0 seconds (default 1.0 seconds, 3.0sec but better)
- Check Server: Click OK to check the STB Server. If the server information is correct, the CAS server ID: 0x0000.
- Save the modified values by pressing the red button on the remote control.
- Go to the TV and check that the channel is working.
- If there are more groups to use the client follow the above procedure.
- If the TV channel STB Client does not work please try to adjust the value of Time Out.
MultiCAS
-DATE: 2011/05/18
-Version: v1.70
-----------------------------------------------
ADD: Added BISS key (See include new_biss.key and below)
- The channel Al Jazeera (Eutelsat W4 / 7 @ 36 ° E)
ADD: High Re-Sharing (Share via local CCcam, see below)
--- How to use Re-Sharing CCcam share ---
Use an account for more Azbox CCcam with MultiCAS
1. Azbox connected to the server CCcam
a. Get Account CCcam.
b. Go to the plug-ins-> OpenXCAS-> Splitter MultiCAS smart cards and CS Menu
c. Select the mode as a server and configure the submenu as follows;
- My IP address: this is the IP address of your Azbox. This will be the IP address of the server to the client.
- Port: 3000 (default) - Please, set between 1000 and 9000.
- Standby time: 2.0 seconds (default). If you use more customers this timeout value should be higher. Please keep below 4.0 seconds.
- Save the modified values by pressing the red button on the remote control.
2. Customer Azbox
a. Go to the plug-ins-> MultiCAS OpenXCAS-> Splitter and smart cards and CS Menu
b. and select the mode as client and configure the submenu as follows;
- Domain Name Server for use: OFF (or ON, if you use DNS.)
- Server IP Address: Set the IP address of the STB.
- Domain Name Server: If use of the domain name server is on, put the domain name.
(If using local shared between Azbox at his home in the server's IP address will be like 192.168.xxx.xxx)
- Port: 3000 (default) - please set the same value with the STB server.
- Standby time: 1.0 seconds (default 1.0 seconds, 3.0sec but better)
- Check Server: Click OK to check the STB Server. If the server information is correct, the CAS server ID: 0x0000.
- Save the modified values by pressing the red button on the remote control.
- Go to the TV and check that the channel is working.
- If there are more groups to use the client follow the above procedure.
- If the TV channel STB Client does not work please try to adjust the value of Time Out.