CASPER
New member
CW600s Premium S/W Upgrade Guide!
Tools Need to update your receiver CW600s Premium Receiver:
1- Null Modem Cable
2- Newest bin Patch “CX_Kround_600Perminum_V1.XX_date.zip" Make sure it is for Premium model.
3- Loading Software "Loader v1.05.zip"
Create a folder on you PCs desktop name "CW_Premium" using Winzip or Winrar unziping program to unzip all files to "CW_Premium" folder.
1) Connect your PC and receiver with twisted RS-232C Null modem cable.
2) Power off the receiver from the back switch.
3) You can load bin file using two methods “boot” Mod and "Standby" Mod. If you want to load the sofware using "Standby" Mod go to #4.
Here how you get into “boot”MOD:
Hold power button on the front of the receiver and turn the power ON from the back of the receiver. You will see a word “boot” on the front LCD screen of the receiver.
4) Turn receiver Off from the back and then ON the receiver; you will see 00:00 now press "POWER" key on front of the receiver panel to make it standby, the LED dot will display “- - : - -“.
5) Start New LoaderV1.05.exe check if the right COM port is selected then select
<Download Main S/W>, press <Open> and select the bin file,“CX_Kround_600Perminum_V1.XX_date.bin" then click <Start>, upgrade will begin.
6) After finishing, the receiver LED will display "-End"
If your experience any problem during the upgrade start over again.
Tools Need to update your receiver CW600s Premium Receiver:
1- Null Modem Cable
2- Newest bin Patch “CX_Kround_600Perminum_V1.XX_date.zip" Make sure it is for Premium model.
3- Loading Software "Loader v1.05.zip"
Create a folder on you PCs desktop name "CW_Premium" using Winzip or Winrar unziping program to unzip all files to "CW_Premium" folder.
1) Connect your PC and receiver with twisted RS-232C Null modem cable.
2) Power off the receiver from the back switch.
3) You can load bin file using two methods “boot” Mod and "Standby" Mod. If you want to load the sofware using "Standby" Mod go to #4.
Here how you get into “boot”MOD:
Hold power button on the front of the receiver and turn the power ON from the back of the receiver. You will see a word “boot” on the front LCD screen of the receiver.
4) Turn receiver Off from the back and then ON the receiver; you will see 00:00 now press "POWER" key on front of the receiver panel to make it standby, the LED dot will display “- - : - -“.
5) Start New LoaderV1.05.exe check if the right COM port is selected then select
<Download Main S/W>, press <Open> and select the bin file,“CX_Kround_600Perminum_V1.XX_date.bin" then click <Start>, upgrade will begin.
6) After finishing, the receiver LED will display "-End"
If your experience any problem during the upgrade start over again.