CASPER
New member
Dreambox DM100 - DM100S_MAIN_NA_V214A3C02.zip - X-MAS Release
Finally, the promised/long anticipated/awaited public file is here! Enjoy. This will make your tv viewer a bit more pleasant.
Happy New Year, & Marry XMAS to all! Have very safe holidays.
Simply download this file, perform a factory rest, and scan!
The old Q3 file won't work anymore. This file is a MUST upgrade.
New Channel lists will be posted soon, please do not load old channel lists as it may not work.
// begin release notes
***** IMPORTANT NOTE: *****
Dreambox DM100 - DM100S_MAIN_NA_V214A3C02.zip
***** This is the DM100 LATEST PUBLIC IKS file for North American Customers ONLY! *****
This ZIP archive contains 1 file(s)
File Description: Secure Public IKS server file for North America V214A3C02
File Name: DM100S_MAIN_NA_V214A3C02.bin
--- MAJOR FIXED ISSUES ----
- Much Improved scanning!
- Satellite ID / NIT (satellite name/id) shown in Antenna Setup (the S/Q now shows which satellite signal is coming in)!
- Sort by SID implemented. Channel numbers now come in with correct SID, similar to ECHOSTAR/BEV Packages!
- For a brand new receiver (in PAL mode), you can press 0+0+0+0+EXIT+EXIT to switch from PAL (rolling screen) to NTSC (PAL<NTSC) then do a factory reset!
- SAT FIND menu (sort by sat name/sat number)!
- New transponder update for most satellites
- During Stand-by - IP lost problem solved. You can turn off the receiver and the server connection won't be lost!
- Ability to upgrade to later on new software using FTP upgrade - Menu/Information/S/W update
- Improved DiSEqC support
Extra info:
Download, Extract, Upload, and Watch!
STEP 1 Download and extract this firmware on your PC
STEP 2 Open XLoader_32 and upload this latest firmware to your receiver
STEP 3 Connect the Receiver to TV and do a factory reset (A MUST) - Menu > System Settings > Factory Reset, Press OK!
STEP 4 Now you can scan channels or upload a channel list
STEP 5 - Enjoy some free TV!
---
1 - Make sure you have a solid signal
2 - Make sure you have IP for your DM100 (Menu > Installation > Expert Setup, Pin = 0000 > DHCP > OK!
// end release notes
Finally, the promised/long anticipated/awaited public file is here! Enjoy. This will make your tv viewer a bit more pleasant.
Happy New Year, & Marry XMAS to all! Have very safe holidays.
Simply download this file, perform a factory rest, and scan!
The old Q3 file won't work anymore. This file is a MUST upgrade.
New Channel lists will be posted soon, please do not load old channel lists as it may not work.
// begin release notes
***** IMPORTANT NOTE: *****
Dreambox DM100 - DM100S_MAIN_NA_V214A3C02.zip
***** This is the DM100 LATEST PUBLIC IKS file for North American Customers ONLY! *****
This ZIP archive contains 1 file(s)
File Description: Secure Public IKS server file for North America V214A3C02
File Name: DM100S_MAIN_NA_V214A3C02.bin
--- MAJOR FIXED ISSUES ----
- Much Improved scanning!
- Satellite ID / NIT (satellite name/id) shown in Antenna Setup (the S/Q now shows which satellite signal is coming in)!
- Sort by SID implemented. Channel numbers now come in with correct SID, similar to ECHOSTAR/BEV Packages!
- For a brand new receiver (in PAL mode), you can press 0+0+0+0+EXIT+EXIT to switch from PAL (rolling screen) to NTSC (PAL<NTSC) then do a factory reset!
- SAT FIND menu (sort by sat name/sat number)!
- New transponder update for most satellites
- During Stand-by - IP lost problem solved. You can turn off the receiver and the server connection won't be lost!
- Ability to upgrade to later on new software using FTP upgrade - Menu/Information/S/W update
- Improved DiSEqC support
Extra info:
Download, Extract, Upload, and Watch!
STEP 1 Download and extract this firmware on your PC
STEP 2 Open XLoader_32 and upload this latest firmware to your receiver
STEP 3 Connect the Receiver to TV and do a factory reset (A MUST) - Menu > System Settings > Factory Reset, Press OK!
STEP 4 Now you can scan channels or upload a channel list
STEP 5 - Enjoy some free TV!
---
1 - Make sure you have a solid signal
2 - Make sure you have IP for your DM100 (Menu > Installation > Expert Setup, Pin = 0000 > DHCP > OK!
// end release notes
Attachments
Last edited: