CASPER
New member
Dreambox DM100 - Private IKS setup ONLY - V214A
// begin release notes
***** IMPORTANT NOTE: *****
***** This is the DM100 private IKS file for North American Customers ONLY! NOT FOR Public Server *****
This ZIP archive contains 1 file(s)
File Description: Secure Private IKS server file for North America v214A
File Name: DM100S_MAIN_V214A.BIN
***** This is the DM100 private IKS file for North American Customers ONLY! NOT FOR Public Server *****
--- MAJOR FIXED ISSUES ----
- Satellite NIT (satellite name/id) shown in Antenna Setup (the S/Q now shows which signal is coming in)
- Channel numbers now come in with correct SID. Sort by SID added.
- Ability to upgrade to later on new software using FTP upgrade - Menu/Information/S/W update
- For a brand new receiver (in PAL mode), you can press 0+0+0+0+EXIT+EXIT to switch from PAL (rolling screen) to NTSC
- SAT FIND menu (sort by sat name/sat number)
- New transponder update for most satellites
- Improved scanning
- In Stand-by - DHCP IP problem solved
Extra info:
Download, Extract, Upload, and Watch!
STEP 1 Download and extract this firmware on your PC
STEP 2 Open XLoader_32 and upload this latest firmware to your receiver
STEP 3 Connect the Receiver to TV and do a factory reset (A MUST) - Menu > System Settings > Factory Reset, Press OK!
STEP 4 Configure your receiver to connect to server (for that you will need cam info, server info, port, user/password)
STEP 5 - Enjoy some free TV!
This for private IKS setup ONLY and does not open any public server channels. You must know the server camd type, server ip, user/pass, and port to have any channels open!
---
1 - Make sure you have a solid signal
2 - Make sure you have IP for your DM100 (Menu > Installation > Expert Setup, Pin = 0000 > DHCP > OK!
***** IMPORTANT NOTE: *****
***** This is the DM100 private IKS file for North American Customers ONLY! NOT FOR Public Server *****
// end release notes
// begin release notes
***** IMPORTANT NOTE: *****
***** This is the DM100 private IKS file for North American Customers ONLY! NOT FOR Public Server *****
This ZIP archive contains 1 file(s)
File Description: Secure Private IKS server file for North America v214A
File Name: DM100S_MAIN_V214A.BIN
***** This is the DM100 private IKS file for North American Customers ONLY! NOT FOR Public Server *****
--- MAJOR FIXED ISSUES ----
- Satellite NIT (satellite name/id) shown in Antenna Setup (the S/Q now shows which signal is coming in)
- Channel numbers now come in with correct SID. Sort by SID added.
- Ability to upgrade to later on new software using FTP upgrade - Menu/Information/S/W update
- For a brand new receiver (in PAL mode), you can press 0+0+0+0+EXIT+EXIT to switch from PAL (rolling screen) to NTSC
- SAT FIND menu (sort by sat name/sat number)
- New transponder update for most satellites
- Improved scanning
- In Stand-by - DHCP IP problem solved
Extra info:
Download, Extract, Upload, and Watch!
STEP 1 Download and extract this firmware on your PC
STEP 2 Open XLoader_32 and upload this latest firmware to your receiver
STEP 3 Connect the Receiver to TV and do a factory reset (A MUST) - Menu > System Settings > Factory Reset, Press OK!
STEP 4 Configure your receiver to connect to server (for that you will need cam info, server info, port, user/password)
STEP 5 - Enjoy some free TV!
This for private IKS setup ONLY and does not open any public server channels. You must know the server camd type, server ip, user/pass, and port to have any channels open!
---
1 - Make sure you have a solid signal
2 - Make sure you have IP for your DM100 (Menu > Installation > Expert Setup, Pin = 0000 > DHCP > OK!
***** IMPORTANT NOTE: *****
***** This is the DM100 private IKS file for North American Customers ONLY! NOT FOR Public Server *****
// end release notes