Beware Beware
PreferredByPete.com Enthusiast
Uploader latest version please use this one
--------------------------------------------------------------------------------
All ipro2k users should only use this version of loader from now on all other previouse version of loader should not be used ever again
Start up the uploader
1 Click on Ipro_loader.exe
2 On the top right choose correct com port (usually 1 or 2) than click OPEN
3 In the middle section you will see a box with “….” Click on that
4 In the new window that opens up you will be able to select the latest file ,
Make sure the file is in .hzf format
5 Make sure power is off from switch in back
6 Click on UPGRADE SOTWARE
7 Turn power on from back switch
8 Make sure you ipro is plugged into the power and has rs232 cable plugged in and turn it ON
9 You will see the update taking place
10 wait till the ipro2000 displays GOOD on its display
11 Power off the unit and plug it back to your tv
12 Remember to FACTORY DEFAULT your unit by going to MENU->Installation->Factory Default
Q&A
Q: When I click on Upgrade Software I see a message PORT NOT OPEN
A: You forgat to select your correct comport and click OPEN
Q: When I click on Upgrade Software on the bottom it says Waiting for Target and box doesn’t update
A: Power off/on the ipro2000 from switch on the back of the unit. Also its possible you have chosen wrong Com port for your PC
enjoy
--------------------------------------------------------------------------------
All ipro2k users should only use this version of loader from now on all other previouse version of loader should not be used ever again
Start up the uploader
1 Click on Ipro_loader.exe
2 On the top right choose correct com port (usually 1 or 2) than click OPEN
3 In the middle section you will see a box with “….” Click on that
4 In the new window that opens up you will be able to select the latest file ,
Make sure the file is in .hzf format
5 Make sure power is off from switch in back
6 Click on UPGRADE SOTWARE
7 Turn power on from back switch
8 Make sure you ipro is plugged into the power and has rs232 cable plugged in and turn it ON
9 You will see the update taking place
10 wait till the ipro2000 displays GOOD on its display
11 Power off the unit and plug it back to your tv
12 Remember to FACTORY DEFAULT your unit by going to MENU->Installation->Factory Default
Q&A
Q: When I click on Upgrade Software I see a message PORT NOT OPEN
A: You forgat to select your correct comport and click OPEN
Q: When I click on Upgrade Software on the bottom it says Waiting for Target and box doesn’t update
A: Power off/on the ipro2000 from switch on the back of the unit. Also its possible you have chosen wrong Com port for your PC
enjoy