Please help i need info to get my NFUSION up, i am using Private Server info on I-LINK and it is working great. I been reading that Nfusion is up on Private Server but i can't find (boot_v1.33.bin file) is there any other way to get it up and running. Thanks for any useful info.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Nfusion help please
- Thread starter dicco500
- Start date
Well for real i needed help this time, i think i have screw up my Solaris, i have use the webloader first file is u48 then v130 then v153.1 then 126 and the last is 58 which i think kill the loading part of the box, i cannot load any other file even if i use rs232 cable from pc to stb nothing happen, the box is still powering up as usual but it won't take any file. Any info well be very appreciate as i hate to loose this box, i only got about 2 months use out of it. Thanks Guys.
is this a nfusion phoenix ?
4. Load the following file in order.
1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode. Load this file only if you currently are running the European files like the T54/T58 bins on the receiver.
2. Load 090701_factory_U48.bin factory file in MAIN mode.
3. Load nfusion_boot_v130 .bin file in BOOT mode.
4. Load 090928_sol_v153_1.bin file in Main mode.
5. Load nfusion-154.2-255.bin file in Main mode.
5. Now do a factory default on your receiver be selecting
1. Menu
2. System Settings
3. Enter 0000 for the password
4. Select Factory Default
5. Ok
6. Ok
6. Insure the Ethernet on the receiver is connected to your network.
Setup LNBs
7. Scan Channels
8. Go to channel 200 and turn off receiver
6. Start NOI 1.23 or new 1.31
7. Go to Settings and enter your server Info. and hit save. Be sure to use colons in the key 61:03:40:34 and so on.
8. Go to Main and hit Start. If you see snow your all set. If you get a connection error try using the server IP instead.
9. Turn on receiver and watch TV. 61:03:40:34:45:40:69:70:98:71:23:41:21:34
4. Load the following file in order.
1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode. Load this file only if you currently are running the European files like the T54/T58 bins on the receiver.
2. Load 090701_factory_U48.bin factory file in MAIN mode.
3. Load nfusion_boot_v130 .bin file in BOOT mode.
4. Load 090928_sol_v153_1.bin file in Main mode.
5. Load nfusion-154.2-255.bin file in Main mode.
5. Now do a factory default on your receiver be selecting
1. Menu
2. System Settings
3. Enter 0000 for the password
4. Select Factory Default
5. Ok
6. Ok
6. Insure the Ethernet on the receiver is connected to your network.
Setup LNBs
7. Scan Channels
8. Go to channel 200 and turn off receiver
6. Start NOI 1.23 or new 1.31
7. Go to Settings and enter your server Info. and hit save. Be sure to use colons in the key 61:03:40:34 and so on.
8. Go to Main and hit Start. If you see snow your all set. If you get a connection error try using the server IP instead.
9. Turn on receiver and watch TV. 61:03:40:34:45:40:69:70:98:71:23:41:21:34
Last edited: