CASPER
New member
NFusion Nuvenio HD SUNS Setup Guide
--------------------------------------------------------------------------------
nFusion Nuvenio NV HD SUNS Setup Guide
nFusion Nuvenio NV HD - Powered by S.U.N.S
-install UHF Module before you start
-Also, note the fan in the Nuvenio NV HD does not run until 3rd party software is installed. The plastic filler on the back is for just that, not anything more. If you install the HD board, it is not needed for anything.
Things to know before you load the software...
One from the factory bin you will see a screen asking for language (pick english) then scroll to 'storage' set to 'front' and 'usb' then you will see 'upgrade' software hit ok you then should see your files from your memory stick (find the new bin file nf_hd_v1.3sR_01.bin)
This is the main software bin after you confirm it is the file you want to load 'hit green' button on remote 'wait' till it completes 'when it does' it will prompt you hit Ok to reboot (software is now loaded) After new bin is loaded you will see softare load on front panel.
Nuvenio NV HD box setup (do factory reset to start guided setup)
-now you move to guided setup at this point in time you should see Language screen again follow the screens to setup your LNB's 'note: be sure to pick correct LNB the 'info' icon on the remote changes LNB type then you pick the satellite to scan with 'ok' button every screen has 'what' buttons do on them once all satellites are scanned then goto 'menu' 'installation' 'network' then back out this connects you to DHCP
-also PVR (is set to front or back USB) records via 'red' button on remote stores file on your attached drive (we will continue to get rest of the functions completed in upcoming bins) we have a set plan for this (did not want to hold up bin) I am more than sure most will like this function this records in .ts format very common but do note your PC you use must support HD for his to play
1080x1920 (no format of drive is needed) and you can playback content on a PC that supports full PVR functions.
Software Needed:
New bin file release is (most current release)
Also factory bin (nf_HD_factory)
Serial Loader for PC (not necessarily needed) USB drive is fine
UHF board install instructions
ippvr HD (beta) v1.5HD
--------------------------------------------------------------------------------
nFusion Nuvenio NV HD SUNS Setup Guide
nFusion Nuvenio NV HD - Powered by S.U.N.S
-install UHF Module before you start
-Also, note the fan in the Nuvenio NV HD does not run until 3rd party software is installed. The plastic filler on the back is for just that, not anything more. If you install the HD board, it is not needed for anything.
Things to know before you load the software...
One from the factory bin you will see a screen asking for language (pick english) then scroll to 'storage' set to 'front' and 'usb' then you will see 'upgrade' software hit ok you then should see your files from your memory stick (find the new bin file nf_hd_v1.3sR_01.bin)
This is the main software bin after you confirm it is the file you want to load 'hit green' button on remote 'wait' till it completes 'when it does' it will prompt you hit Ok to reboot (software is now loaded) After new bin is loaded you will see softare load on front panel.
Nuvenio NV HD box setup (do factory reset to start guided setup)
-now you move to guided setup at this point in time you should see Language screen again follow the screens to setup your LNB's 'note: be sure to pick correct LNB the 'info' icon on the remote changes LNB type then you pick the satellite to scan with 'ok' button every screen has 'what' buttons do on them once all satellites are scanned then goto 'menu' 'installation' 'network' then back out this connects you to DHCP
-also PVR (is set to front or back USB) records via 'red' button on remote stores file on your attached drive (we will continue to get rest of the functions completed in upcoming bins) we have a set plan for this (did not want to hold up bin) I am more than sure most will like this function this records in .ts format very common but do note your PC you use must support HD for his to play
1080x1920 (no format of drive is needed) and you can playback content on a PC that supports full PVR functions.
Software Needed:
New bin file release is (most current release)
Also factory bin (nf_HD_factory)
Serial Loader for PC (not necessarily needed) USB drive is fine
UHF board install instructions
ippvr HD (beta) v1.5HD