CASPER
New member
Nfusion HD Module Installation Guide
--------------------------------------------------------------------------------
Do this with power unplugged.
1] Remove 3 crews holding the cover on the Box.
2] Remove rubber plug from UHF Remote Antenna hole
3] Insert board into unit with threaded cable connector portion through UHF Remote Hole
4] Attach board with crews supplied
5] Attach board with washer and nut on threaded cable connection
6] Attach black ended cable to main board (It's obvious where and it's keyed so you can't go wrong)
7] Attach other end of black ended cable to board(keyed..can't go wrong unless you're a gorilla)
8] Attach white cable that is in box to board (also Keyed)
9] Replace cover on Box
10] Attach loop though cable to board and IF Out on Box.
You're Done...
Enjoy HD
NOTE: The white cable that is already inside the box with this first shipment may not be there with future shipments. I think they just left it in the box when they removed the modules from this first production run. That would explain why there's an identical cable included with the module.
--------------------------------------------------------------------------------
Do this with power unplugged.
1] Remove 3 crews holding the cover on the Box.
2] Remove rubber plug from UHF Remote Antenna hole
3] Insert board into unit with threaded cable connector portion through UHF Remote Hole
4] Attach board with crews supplied
5] Attach board with washer and nut on threaded cable connection
6] Attach black ended cable to main board (It's obvious where and it's keyed so you can't go wrong)
7] Attach other end of black ended cable to board(keyed..can't go wrong unless you're a gorilla)
8] Attach white cable that is in box to board (also Keyed)
9] Replace cover on Box
10] Attach loop though cable to board and IF Out on Box.
You're Done...
Enjoy HD
NOTE: The white cable that is already inside the box with this first shipment may not be there with future shipments. I think they just left it in the box when they removed the modules from this first production run. That would explain why there's an identical cable included with the module.