bharatsrinavasan
New member
I have dishpro single LNB in one dish (For Echo3) connected to Dual Dish Pro 2nd Disk (For 119 and 110) . Then there is a single cable coming out of 2nd dish and going to my Fortec (Converted to PUFF Pansat 2700).
I am able to scan and watch Echo 7 and Echo 8,10K but not the 2nd dish. Please let me know how can I see the channels from the 2nd dish.
Following is an Antenna setup in my FLU receiver.
FLU setting:
------------
Echo7K:
=======
LNB Type = Standard
LNB Local-Freq. = 11250
22KHz = Off
DiSEqC = (1.0) #1
legacy SW = None
Skew = -45
TP = 12486 v 20.000
Positioner Setting = disabled
Scan = All
Echo8,10K:
=======
LNB Type = Standard
LNB Local-Freq. = 11250
22KHz = Off
DiSEqC = (1.0) #2
legacy SW = None
Skew = +45
TP = 12486 v 20.000
Positioner Setting = disabled
Scan = All
I am able to scan and watch Echo 7 and Echo 8,10K but not the 2nd dish. Please let me know how can I see the channels from the 2nd dish.
Following is an Antenna setup in my FLU receiver.
FLU setting:
------------
Echo7K:
=======
LNB Type = Standard
LNB Local-Freq. = 11250
22KHz = Off
DiSEqC = (1.0) #1
legacy SW = None
Skew = -45
TP = 12486 v 20.000
Positioner Setting = disabled
Scan = All
Echo8,10K:
=======
LNB Type = Standard
LNB Local-Freq. = 11250
22KHz = Off
DiSEqC = (1.0) #2
legacy SW = None
Skew = +45
TP = 12486 v 20.000
Positioner Setting = disabled
Scan = All