Scammer
Banned
C&P
REQUIRED:
1. Wiznet (software)
2. svlan_usb_wiznet (file)
3. svlan_43 (file)
5. svlan HD9 (bin)
NOTE:
*Before beginning this conversion, update the receiver with Bin 514.
*Note the directory on your computer you place the svlan_43 file. You will have to find it later in the process.
STEP BY STEP:
1. Install wiznet on to your PC
2. Save the svlan_usb_wiznet to your USB key
3. Upload the svlan_usb_wiznet to the receiver like you would any other bin
4. Reboot with rear main switch
5. Open wiznet and "click" the following keys:
a.SEARCH : this should find the IHUB and show you the version number
b.SETTING
c. UPLOAD: this will open your computer directory. At this point find the svlan_43 file on your computer and upload it to the IHUB.
6. Reboot with rear main switch
7. Upload svlan HD9 Bin to the receiver as you would any other Bin.
8. Check to see if the process was complete by opening wiznet and checking the version. It should now read 4.8
Your IHUB is now a LAN.
At this point you can use the new LAN on any private server or you can buy a serial number form Ebay and access the new Sonicview public server.
Hope this helps
Thanks goes to gformica
END C&P
REQUIRED:
1. Wiznet (software)
2. svlan_usb_wiznet (file)
3. svlan_43 (file)
5. svlan HD9 (bin)
NOTE:
*Before beginning this conversion, update the receiver with Bin 514.
*Note the directory on your computer you place the svlan_43 file. You will have to find it later in the process.
STEP BY STEP:
1. Install wiznet on to your PC
2. Save the svlan_usb_wiznet to your USB key
3. Upload the svlan_usb_wiznet to the receiver like you would any other bin
4. Reboot with rear main switch
5. Open wiznet and "click" the following keys:
a.SEARCH : this should find the IHUB and show you the version number
b.SETTING
c. UPLOAD: this will open your computer directory. At this point find the svlan_43 file on your computer and upload it to the IHUB.
6. Reboot with rear main switch
7. Upload svlan HD9 Bin to the receiver as you would any other Bin.
8. Check to see if the process was complete by opening wiznet and checking the version. It should now read 4.8
Your IHUB is now a LAN.
At this point you can use the new LAN on any private server or you can buy a serial number form Ebay and access the new Sonicview public server.
Hope this helps
Thanks goes to gformica
END C&P