[Not Working!] No video or audio - Viewsat Discussions Forum - Page 1 - PBP Help Forums

Results 1 to 7 of 7

No video or audio

This is a discussion on No video or audio within the Viewsat Discussions forum, part of the Satellite / FTA category; Hello, I am a newbie and am having problems installing the WF and getting it to work. I have followed ...

  1. #1
    Probationary PBP Member rascal7887's Avatar
    Join Date
    Jul 2010
    Posts
    4
    Rep Power
    0

    Default No video or audio

    Hello, I am a newbie and am having problems installing the WF and getting it to work. I have followed every instruction for installing, and even followed the one to install file V0146. I have did factory default and rescanned in several times, I have tried files 100322 - 100320...and 100614 - 100616 I still get the no video or audio. The forecaster gives me the forecast, but can not go any further...Below is what I see when I try to load the files as far as the S/W. Do not know what other info is needed.

    DX-X00-N APP 1.00.03 = 100322
    DX-X00-N APP 2.00.03 = 100320
    DX-X00-N APP 1.00.05 = 100614
    DX-X00-N APP 2.00.05 = 100616

    I am totally lose and confused...


  2. #2
    Probationary PBP Member rascal7887's Avatar
    Join Date
    Jul 2010
    Posts
    4
    Rep Power
    0

    Default Re: No video or audio

    I am using an Ultra...and even followed the instructions for the link WF Latest Instructions & Troubleshooting.

  3. #3
    Probationary PBP Member rascal7887's Avatar
    Join Date
    Jul 2010
    Posts
    4
    Rep Power
    0

    Default Re: No video or audio

    I have even tried to load 100624 and updated the S/W, I presume that is how you update the WF.

  4. #4
    Probationary PBP Member rascal7887's Avatar
    Join Date
    Jul 2010
    Posts
    4
    Rep Power
    0

    Default Re: No video or audio

    Both the green and the yellow lights stay's on on the WF. I can not tell if it is sending data.

  5. #5
    PreferredByPete.com Enthusiast PBP Member Rank 7 Beware Beware's Avatar
    Join Date
    Sep 2007
    Location
    between here & there
    Posts
    3,530
    Rep Power
    10

    Default Re: No video or audio

    The 614 for the defective WF works good.
    All you have to do is first flash box with the 614 and update WF....
    Then flash with 624 and also update WF
    Factory reset and rescan.....

  6. #6
    PreferredByPete.com Enthusiast PBP Member Rank 7 Beware Beware's Avatar
    Join Date
    Sep 2007
    Location
    between here & there
    Posts
    3,530
    Rep Power
    10

    Default Re: No video or audio

    Weather Forecaster Installation Instructions

    This setup is almost as easy as the old standalone days... It is definitely the easiest of any other I have seen....this is assuming your receiver is already hooked up to tv and satellite dish and ready to go.

    Personally, I would do a factory default, reset settings, and do a fresh scan of the sats.

    Make sure your WF is hooked to your receiver via serial cable, make sure your network cable is hooked to your internet connection, via whatever your source, direct, router, etc... and also make sure power cable to WF is plugged in, then...

    1. Load Factory firmware
    Upgrade main S/W to the receiver through USB.
    -. Ultra lite : PFTAUSW-100322UL (Ultra lite) or
    -. Ultra : PFTAUSW-100322U (Ultra)

    2. Go to installation => Serial Setup => Network Setup => Network setting => put your IP
    -. If you use DHCP, just put the DHCP in Network setting. (Most will use DHCP)

    3. Go to installation => Serial Setup => Network Setup => Network S/W upgrade => Start Upgrade.
    -. Then the S/W for WF will be upgrade automatically.

    Once the above is done, your stb flashed, used the serial setup to set networking settings, updated the WF via Network s/w upgrade... you are ready to test the weather feature.

    To do this:

    1. Go to installation => Serial Setup => Regional Weather
    2. Choose Region => Pick your location or close by location
    3. Move down to Get Regional Weather => Press Ok
    4. Depending on your internet connection it may take up to 2 minutes to download Regional Weather Information.

    Note: Weather Forcast feature is only available on factory firmware (100318 or 100322)

    To get channels:

    4. Load Latest firmware
    Upgrade main S/W to the receiver through USB.
    -. Ultra lite : PFTAUSW-100320UL (Ultra lite) or
    -. Ultra : PFTAUSW-100320U (Ultra)

    5. Go to installation => Serial Setup => Network Setup => Network S/W upgrade => Start Upgrade.
    -. Then the S/W for WF will be upgrade automatically.

  7. #7
    Administrator PBP Administrator Rank Speed Pool Billiards Game Online Champion, ESP Run Champion CASPER's Avatar
    Join Date
    Sep 2007
    Location
    South of CANADA
    Posts
    16,380
    Rep Power
    10

    Default Re: No video or audio

    there are new files posted today for WF have u check the files forum....for your ?????????????
    .







    READ FORUM RULES HERE : Rules





    The information contained in any of my posts relating to DSS satellite reception is information that I have gathered from publicly sources under the same protections of Free Speech governed under the Laws of the U.S. is for information use only.The distribution of said information is considered a form of free speech. I do not advocate the illegal use of
    such information under the U.S. Laws.

Similar Threads

  1. Lagging, video/audio out of sync
    By CASPER in forum Nano Premium How to's
    Replies: 0
    Last Post: April 6th, 2011, 06:58 PM
  2. How to check the audio/video drivers for Windows XP?
    By Allen in forum Hardware Drivers
    Replies: 2
    Last Post: August 2nd, 2010, 09:21 AM
  3. No VIDEO OR AUDIO
    By bafblaise in forum General FTA Discussions
    Replies: 2
    Last Post: April 13th, 2009, 04:44 PM
  4. No Audio/ Video
    By Cibernite in forum Viewsat Discussions
    Replies: 4
    Last Post: December 24th, 2007, 09:51 AM
  5. Replies: 0
    Last Post: May 21st, 2007, 04:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •