Status
Not open for further replies.

cngr96

New member
Is this just a BEV issue where the Pansat 2700 is not auto-rolling? I have the 2700 and using it on DN and it is autorolling. Today, there was about 2 minute blackout, around 11:15mdt, but then updated. Just curious.
 

haak89

New member
I dont know, every time the code changes i have to changed manualy, i tryed lots of things but did't work,, i'm using DN too with pansat 2700 and its the same, and the code just changed now so i'm waiting for the new code so i can make it work again lol. so do u have any idea?
 

Rumas

Administrator
Staff member
If you have the latest bin file loaded for the pansat 2700 located here. Your autoroll should be working fine.

Go to --> menu-->Parental controls-->password 0000-->down to autoroll option
Make sure everything says on.

Let me know if this solves your problems.
 

haak89

New member
I'm going to download it now. and i hope i will make it work fine. Thank you very much even if it didn't work, but i have a feeling that it will work lol.
 

haak89

New member
here is what happen! i downloaded it, and after about five mins the key changed from the right key to a diff. key and the pic is gone, so i think i have to turn off the DN autoroll. so what do u think?
 

Cobra

Administrator
I would shut off the autoroll and enter the keys manually. That file was supposed to have an autoroll fix, but it looks like it's not working.
 

Cobra

Administrator
We check for one daily, and unfortunately, there is not one yet. We WILL post as soon as it exists.
 

cngr96

New member
My set up is a follows:
System Information: X-87BL
API:75-2.05_EUbx
Boot Ver : 75
31.Jul.2007

AutoRoll:
Keycode = on
Dishnet Autoroll = on
Bev Autoroll = on
GlobeCast Autoroll = off

Under User Setup
TP Autoupdate is off.

I was running 2.01 code untill recently when they started rolling the codes every few hours. My 2700 would do what you just descibed, it would work for a little while then quit, and I would find the good keys had been replaced by bad ones. This is supposedly a ECM that changes tohe keys to bad ones. Turning off autoroll prevented this. Now I am running the 2.05 code and it autorolls with no problems.

Hope this helps.
 

darklist

VIP Member
pansat 2700A with the new file working Fine
file #
zip.gif
Pansat 2700 fix X-87BL_070731_B75_205v1_


just make sure that you turn AutoRoll on and set default keys


darklist
 

cngr96

New member
Hey haak89, just curious it you resolved your issue and if so, what was the final resolution. Just curious...
 
Status
Not open for further replies.
Top