Status
Not open for further replies.

CASPER

New member
Convert FLU/2500 to PUFF 1.0.3 - It's Easy!

--------------------------------------------------------------------------------

Hey, folks!

I see a lot of people here asking me how to convert the following receivers to PUFF 1.0.3: Fortec STAR Lifetime Ultra, Pansat 2500A, and other Pansat 2500A Clones. The latest PUFF conversion is PUFF 1.0.3 which uses Full EMU bins and is faster than the older PUFF conversions.

Here are simple instructions that you can use to convert your receiver to PUFF 1.0.3


Download the attached folder. It has four files: Blacklist Loader, Ukronic Loader, PUFF 1.0.3 Boot file and the latest working bin file.
Connect your receiver to your PC using the serial cable.
Open Ukronic Loader and select the PUFF 1.0.3 bin file. Make sure you select the correct COM port. Also, the file type should be BOOT FILE.
Turn your receiver ON and wait for the ON to display on the receiver's front panel.
Click the DOWNLOAD button on the loader's screen and let the boot file load.
After it's done, turn OFF your receiver from the back switch.
Open Blacklist Loader and select the latest bin, which in this case is: Ukr_Jvvh-Team-PUFF_(Lzma)_v207
Make sure the COM port is correct and BOOT option is selected.
Turn ON your receiver and as soon as you see any light on the receiver's front panel, click the WRITE BIN button on the loader.
The file will load. After it's done, close all the loader windows and disconnect your receiver from your PC.
 

Attachments

  • PUFF Convert.zip
    615 KB · Views: 299
Status
Not open for further replies.
Top