CS_235T_Light_100t_series_ serial bin FLU & 2500 to 2700

CS_235T_Light_100t_series_ serial bin FLU & 2500 to 2700
ALL IS UP D/N & B3V
THIS IS FOR PEOPLE THAT BEEN CONVERT TO 2700, AND DO A FACTORY RESET TO GET ALL SATS

NOTE: AFTER DOING A SET-UP DO A HARD REBOOT SWITCH IN BACK OFF/ON AND SCAN B3V FIRST

Thanks go to Chancysand for CS_235T_Lightning_100t_Series_serial
Load Chancysand CS_235T_Lightning_100t_Series_serial Load over any of the CS_233T serial bin, I used the 2500 to 2700serial Loader, with box off bin in loader, then turn box on and when it starts flashing hit write and ALL WAYS LET IT BOOT UP ALL THE WAY
but use what ever loader works for you

NOTE: AUTOROLL OFF AND STILL A/R KEYS INN

ALSO: SAVE YOUR CHANNLS BEFORE YOU LOAD ANY NEW BIN WITH CHANNEL MASTER & THEN LOAD TO STB AFTER YOU

AFTER YOU LOADED NEW BIN< USE PANSAT_2700 AS YOUR STB WITH CHANNEL MASTER

NOTE: after loading 235T serial bin and if you get scramble hit 8282 on remote and do a set key default


ALSO Thanks to Chancysand for the 235T FULL jTAG BIN for person can't load through serial

NOTE: AFTER SET-UP AND BEFORE SCANNING DO A REBOOT SWITCH IN BACK OFF/ON AND SCAN BEV FIRST