CASPER
New member
How to load the new 302 emu bin
--------------------------------------------------------------------------------
You will need to download the new factory v06 bin, and the 302 Emu bin, once you have done that do the following.
1. Go to Antenna setup and write down your settings for your sats.
2. Put the two unzipped files on your SD card. (factory v06_api.bin, and V302_Emu.bin)
3. Using the SD card, flash the receiver with the Factory v6 api.bin
4. When the receiver reboots, go to menu, pick Factory reset and press OK
5. Now go back to SD Memory and pick the v302 Emu. bin and load it.
6. Go to installation, antenna setup, and setup your sats using the info you wrote down in step 1.
7. Now do a new scan your sats, when it is done you should have TV if you do not just wait it can take a while
8. If you like you can edit the new scan with channel master to setup your favorites, but you can not use an old list, you can make a template of the old list and apply it to the new scan and that will work.
--------------------------------------------------------------------------------
You will need to download the new factory v06 bin, and the 302 Emu bin, once you have done that do the following.
1. Go to Antenna setup and write down your settings for your sats.
2. Put the two unzipped files on your SD card. (factory v06_api.bin, and V302_Emu.bin)
3. Using the SD card, flash the receiver with the Factory v6 api.bin
4. When the receiver reboots, go to menu, pick Factory reset and press OK
5. Now go back to SD Memory and pick the v302 Emu. bin and load it.
6. Go to installation, antenna setup, and setup your sats using the info you wrote down in step 1.
7. Now do a new scan your sats, when it is done you should have TV if you do not just wait it can take a while
8. If you like you can edit the new scan with channel master to setup your favorites, but you can not use an old list, you can make a template of the old list and apply it to the new scan and that will work.