Status
Not open for further replies.

CASPER

New member
AZ Box ..If in trouble with one's EMUs/CS etc.
c/p goran



If in trouble with one's EMUs/CS etc. I think one should update "cleanly", as it were, by deleting it all!

UPDATE PROCEDURE:

0) Press the HOME button on your remote -> Menu -> Plugins -> OpenXCAS -> delete camd's [for those of you who have installed those earlier; new users will not have these, so this step doesn't apply to them]

1) HOME -> Settings -> Data reset -> Factory reset

2) Put a "patch" [= Image or Firmware or FW, the one you want to programme your AZbox HD with] on your USB memory stick, then put the USB memory stick into your AZbox HD -> Reboot your AZbox HD, using the power button at the back of the receiver

3) When it reboots it should give you various options, one of them is to Format application area [I do not get this option with 1759 FW, so I went back to the previous FW 1621, to be able to do it] -> OK/confirm it [this gives you a definitive clean install now]

4) When the formatting is done you can install any Patch.bin you want - just make sure it is named patch.bin [right click on it and rename it, if necessary, as sometimes it comes as patch.sit file]

4a) When it's finished and AZbox HD is rebooting - be close to the receiver to do this quickly - take the USB stick out or if you feel lazy choose Reboot without update!

5) Menu -> sort out the Settings, as you need them [Net, Audio/Visual, Antena etc.]

6) Put a channel list in at this point, using Telesat's Editor and reboot [you may wanna rescan your fav satellite positions, just in case], make sure you're online for the next step

6) Download and install OpenXCAS [by pressing HOME -> Plugin -> Add plugin via red button]
6a) Go to Plugins -> enter OpenXCAS by pressing the OK button on your remote and go to Manual Install option
6b) Install: MultiCAS, MGcamd and NewCS [all three are online to DL and install straight into AZbox HD]
6c) Go to, say TV Globo on Hot Bird and wait for the AU to create a working key, meaning MultiCAS is active and functioning properly with all the valid Master Keys
[activate it via HOME -> Plugins -> OpenXCAS -> Activate -> MultiCAS must NOT have # in front of it, which is done by using the blue button, then restart it by pressing the yellow button -> OK when it restarts, then go out of the Menu using the Back button and into TV part of the Menu to the channel you want to open] and TV Globo should open up very soon and be working fine... Digi TV on 1'W likewise, as they are both encrypted in Nagra2, which is hacked!

7) Install Mbox and add cwshare.cfg and start messing with it... See my thread on the topic.

7a) Also, Incubus CS SW, possibly by Damir's installation proggy... Edit the config file for your GBox [and CCcam, if not installing with Damir's proggy] details.
 
Status
Not open for further replies.
Top