L

latinlover

Guest
Captive works New OSD Features guide
CaptiveWorks 600S New OSD Features Guide!!

--------------------------------------------------------------------------------

CaptiveWorks 600S New OSD Features Guide

Here is a guide for all of the features in New OSD. I will keep that same “How tos” format because it just makes so easy to find a how to about a specific feature. Most of the features are same as old OSD but there location is changed or heading is changed in New OSD.

==========================
1.How to set 10/24 channels display?
==========================
Main Menu -> System Setting -> OSD -> Scroll down to Channel List change that option to 10 or 24.
Now whenever you will press Ok button on your remote it will show 10 channels or 24 channels.
If you press F1 key system will sort all of the channels

=====================
2.How to set Event Timer on fly?
=====================
With new OSD you can set event timer to certain event that will start in future sometimes on fly. Before set an event timer just make sure EPG is fully loaded.
EPG -> Scroll to the event that you want to tune automatically and press “Green” key from your remote. A window will open to confirm date and time that event will start; Now just Press Ok to set.

=======================
3.How to Factory Default a CW600?
=======================
New OSD the location for this feature is changed but it works exactly the same as in old OSD.
Main Menu -> Installation -> Factory Default

===============
4.How to set time?
===============
Main Menu -> Channels Manager -> Timer -> Time setup

===========================
5.How to Enable Patch or Disable Patch?
===========================
Exit all menus, Press F1 key; the LED will display 'H', then press '000'

===================
6.How to Edit Patch key?
===================
After Enable patch key, go to Main Menu-->Accessories--> Key Menu

========================
7.How to configure the SID sort?
========================
From main menu->system setting->system->channel No. style can change:
Normal: Normal sort order
SID sort: Dish order

=====================
8.How to Category Search?
=====================
1) Make sure the epg is loaded- to do that just open the epg screen and see if the boxes are full, if not go choose any box that has no epg and wait 15-20 sec and it will be filled. (You only need to do this once in the beginning).

2) Then exit and hit F2 on your remote.

3) Category box will open, just choose what category you want to watch and hit ok

4) After 2-3 seconds, a list of channels will open which are CURRENTLY playing these categories (every half hour this list changes when a new show is finished or started)

5) Next to the channel there is the title of the show, if you hit INFO button it will open the full information, hit INFO again and it will disappear. Just select what you like and watch.

================
9.How to Blind scan?
================
BLIND SCAN function can be accessed by going to
From main menu-> Installation -> Antenna Setting -> selecting the satellite that you want blind scan and press Yellow key key on your remote.

=========================
10.How to Clone CW600s Box to Box?
=========================
From DigitalPlus:
1) Connect the master and slave box with twist RS232 null modem cable (pin2 to pin3, pin3 to pin2, pin5 to pin5).
2) Start the master receiver and press "POWER" key to make it standby “- - : - -“.
3) Start the slave receiver, in the master box the led will display 'H' and blink it.
4) Input the password:
111 ---- Transfer S/W
222 ---- Transfer data
333 ---- Transfer data, then S/W
444 ---- Copy whole flash except Boot Loader.
5) After finishing inputting the password. Transfer will begin. When it finish, the LED will Display "-End". Disconnect the cable, start your receiver.
Note: By the different password, you can do what ever you want to do for Box to Box.

=====================
11.How to set DishPro LNBs?
====================
DishPro LNB settings can be accessed by going to
Main Menu-> Installation-> Antenna Setting-> LNB type-> OCS-DP

===============================
12.How to Set Legacy SW21/42/44/ Switch?
===============================
Legacy Switches settings can be accessed by going to
Main Manu-> Installation-> Antenna Settings-> Legacy SW
Set the type of switch you got on your dish setup. Don’t forget to set DISCQ setting to none otherwise it will not work properly.
===============================

13.How to set channel lock on certain channels?
===============================
Channels can be locked by going to
Main Manu->Channels Manager->TV Channels -> Right Arrow-> Lock/unlock go to specific channel and press OK key on your remote.

=============================
14.How to video adjustments option menu?
=============================
Video options can be accessed by pressing zero “0” when view your normal TV. Brightness, Contrast, Saturation, Hue, Sharpness and Tint can be adjusted

================================
15.How to Auto TP?
================================
Auto Transponder Update can be Turn ON and Turn OFF by going to:
Main Menu ->System settings-> system-> Auto TP changed to ON or OFF.

===============================
16.How to get Twelve hour EPG on a CW600s?
===============================
To get 12 hours EPG tune to any channel on listed Transponders. EPG will show 12 hour programming.

Some TPs below help you get 12 hour EPG:
***********:
110W TP:12516
119W TP:12486
121W TP:12016
148W TP:12486
105W TP:11840
BellVU:
82W TP:12239
91W TP:12268

=====================================
17.How to change Time setting from Military to Regular?
================================== ===
To change time from Military to Regular go to
Main Menu -> System Setting -> OSD -> Time Display Format change to 12/24.

=======================================
18.How to search Favorite show channel number and time?
=======================================
Shows can be searched with start time and channel number by pressing the Click on TXT button on your remote -> select OK -> then type your show name and search.

===============================
19.How to Turn ON/OFF Auto Roll feature?
===============================
Autoroll feature can be turn OFF and ON by going to:
Main Menu -> System Setting -> OSD -> Autoroll -> ON/OFF

==============================
20.How to Turn ON/OFF key update message?
==============================
Key update message can be turn OFF or ON. This feature can be accessed by going to:
Main Menu -> System Setting -> System -> ON/OFF

=======================================
21.How to turn ON/OFF Dishnet/BellXvu full name display?
=======================================
This unique feature can be accessed by going to:
Main Menu -> System Setting -> System -> Scroll down to the next page -> ON/OFF

==============================
22.How to select packages for Dish and Bell?
==============================
Echostar and Bell ExpressVu packages can be accessed by pressing the “SAT” Button from your remote and choose the option you like.
 
Top