CASPER
New member
NANO 2 MENU GUIDE:
1) First thing you come to when you hit menu is the channel manager hit ok. Once in here you can pick your favorites,rename,move,lock,or delete. That is providing you enter password 0000 also you canmove to bottom of screen you see red circle hit that button on remote to view channel. Secondly hit yellow button on remote to fav rename. Thirdly blue button to rename sats to suit yourself.
2) Next on the menu list is installations such as channel search,diseqc Switch,Motor Setup,Network.
3) Ok first up is channel search,enter password,here you have all settings for sats top should have sat you are watching like echo 7 119,next diseqc should show which diseqc port you are on such as 4, tp frequency for channel, lnb next if you are using legacy lnbs use 11250, 22khz-off, next multi dish switch if you use one set for appropraite switch, next search options all channels blind scan whichever i personally use all chans., next lnb power set to on, last is the search button hit this to scan channels.
4) Next on the menu is diseqc switch, here is where you set up your switch to get signal diseqc 1 just hit ok select your sat then then lnb type legacy set at 11250 which is standard or whichever setup you have in the drop down list.
5) Next is motor setup im not going to get into this one as i dont use one but its all self explanatory in the menu.
6) Network important one here go to ip setup hit ok button,network setting to auto then scroll down to bottom of page and hit apply may take awhile to fill in then you should see diff numbers in all areas. Next home stream setup ill leave that for someone else also.Next is iks registration just hit ok and wait until you get a non error message with some letters and #s
7) Next OSD setup this for language ,display of info bar such as 4 sec.screen format, channel history, picture setting.
8) Next is control panel, rf channel such as channel 3, closed caption, epg time display, dish/bell epg such as 7 days, renumbering, local area, full channel name, auto tp
9) Time Adjust ,local time set your time here ,summer time daylight saving or not, year, month, date, hour your time zone will appear at bottom of screen.
10) Parental lock ,self explanatory four zeros will get you in then you can set your preference.
11) Utility system information hit ok will tell exactly what boot and software is on your fta
12) Usb here is where we format our usb stick and also load your new software
13) Time record is something im also not getting into thats for another guide.
14) Factory default hit ok brings unit back to factory settings
1) First thing you come to when you hit menu is the channel manager hit ok. Once in here you can pick your favorites,rename,move,lock,or delete. That is providing you enter password 0000 also you canmove to bottom of screen you see red circle hit that button on remote to view channel. Secondly hit yellow button on remote to fav rename. Thirdly blue button to rename sats to suit yourself.
2) Next on the menu list is installations such as channel search,diseqc Switch,Motor Setup,Network.
3) Ok first up is channel search,enter password,here you have all settings for sats top should have sat you are watching like echo 7 119,next diseqc should show which diseqc port you are on such as 4, tp frequency for channel, lnb next if you are using legacy lnbs use 11250, 22khz-off, next multi dish switch if you use one set for appropraite switch, next search options all channels blind scan whichever i personally use all chans., next lnb power set to on, last is the search button hit this to scan channels.
4) Next on the menu is diseqc switch, here is where you set up your switch to get signal diseqc 1 just hit ok select your sat then then lnb type legacy set at 11250 which is standard or whichever setup you have in the drop down list.
5) Next is motor setup im not going to get into this one as i dont use one but its all self explanatory in the menu.
6) Network important one here go to ip setup hit ok button,network setting to auto then scroll down to bottom of page and hit apply may take awhile to fill in then you should see diff numbers in all areas. Next home stream setup ill leave that for someone else also.Next is iks registration just hit ok and wait until you get a non error message with some letters and #s
7) Next OSD setup this for language ,display of info bar such as 4 sec.screen format, channel history, picture setting.
8) Next is control panel, rf channel such as channel 3, closed caption, epg time display, dish/bell epg such as 7 days, renumbering, local area, full channel name, auto tp
9) Time Adjust ,local time set your time here ,summer time daylight saving or not, year, month, date, hour your time zone will appear at bottom of screen.
10) Parental lock ,self explanatory four zeros will get you in then you can set your preference.
11) Utility system information hit ok will tell exactly what boot and software is on your fta
12) Usb here is where we format our usb stick and also load your new software
13) Time record is something im also not getting into thats for another guide.
14) Factory default hit ok brings unit back to factory settings