Recent content by CheezHead

  1. C

    [Problem!] no display on tv

    It is easiest to load using USB if possible. Also, you cannot put a "splitter" in the line to use either receiver. Set the Viewsat up with the coax directly connected to it, then find a better way to alternate between the two. The zsinit error is probably an error in sending via zmodem (an...
  2. C

    NO HD CHANNELS and multiple same channels

    The short answer on locals. Most are on spot beams that only cover the area they are intended for, so you probably won't get any OR stations. When you bought the MAX HD did you get it with the 8PSK module installed? Most HD STBs only come from the factory with QPSK capability. That's the...
  3. C

    [Help!] Missing Channels

    Please post your hardware and sat settings to get more help. PPVs are E10,11 and guide is on E7 so I don't think it's a switch setting problem, but all info is needed to begin troubleshooting. Do you get ch 200?
  4. C

    cannot load file viewsat says 0000

    You really need to supply more info. have you ever loaded updates into it? If so, has it always been through serial cable? Do you have a flash drive to update from? Have you followed standard instructions to do factory reset then reload newest factory bin?
  5. C

    [Help!] lost ecostar 110

    You really need to give much more detailed info to get help. What type of dish, LNBs, receiver, sat settings in receiver etc.
  6. C

    [General Question?] Mpeg 4

    N3 is a method of encrypting the video, MPEG is a method of compressing the video. They have nothing to do with one another.
See more
Back
Top