Rumas

Administrator
Staff member
How to enter keys on a coolsat 6000

1. Either Enter 8282 on your remote, or you can hit the “Mute” button on your remote and then hit the “Exit” button.

2. Then Making sure that you have the very top box says 1 Nagravision for Dish Net, or 2 Nagravision for BEV.

3. To enter your keys, you can use the numbers on the number pad, and the info button to change letters. Hit the Info button until you get the letter you want, and then hit the Right Arrow to change slots.

4. Or, you can hit the OK button and a new menu will pop up. Just use your arrows to select the numbers and letters you want and hit the OK button after each one. (Hit the exit button one time to get out of the little pop up screen.)

5. Now scroll down to the data in line 10. Enter the first half of KEY 86 (or Key 00) in this line.

6. The go to line 11 and enter the second half of Key 86 (or Key 00) in this line.

7. Then go to line 20 and enter the first half of Key 96 (or Key 01) in this line.

8. Next go to line 21 and enter the second half of Key 96 (or Key 01) in this line.

9. Now hit the Exit button.

10. When the next screen pops up asking if you want to save changes, Use your arrows and select “Yes” and hit the “OK” button.

11. Now, change your channel, and watch TV.

Post here if you need more info!
 

Rumas

Administrator
Staff member
Very top box will say 1 Nagravision for Dish Net, or 2 Nagravision for BEV.
 

djtuttyram

New member
i double checked keys and have 145

Same issue here. Double and Triple Checked Keys..Autoroll is off - still "Scrambled Channel" - Even tried to do a database reset and start from scratch. No luck... The only thing weird I could see is that for DN it says 0101 for the new key, but when i Choose Dish Network in the Ident window, it's listed as 0001, the same for BEV, in the key above its 0901, but in my IDENT window it's 0801. I've even tried manually changing that too, but no luck. I wonder what I'm doing wrong?
 

Cobra

Administrator
VERY IMPORTANT:
Keys must be entered under the proper ident key in order for it to work. Most receivers will show both an 0901 and an 0801, also an 0001 and a 0101.

I have come across the problem before where I've had to either turn off the receiver with the switch in the back, wait 5 sec. and turn it back on for it to work after entering the keys. Also, if that doesn't work, try a Blind Scan.

The only other thing you can do is wait for a fix for your receiver. There should be one very soon.
 

jennialley

New member
Hello I have put the keys in and followed all directions but still down, can you tell me if the other nagrivisions are suppose to have keys in them? I somehow got all the nagrivisions on 8282 misxed up I think?
 

agrimm98

New member
How to enter keys on a coolsat 6000

--------------------------------------------------------------------------------

Does this apply to Coolsat 5000? if not, please advise
 
Top