CASPER
New member
The best way to accomplish the dish 1000 set up is NOT hook the 129 into the built in lnb input on the 1000.
The best thing to do is run 2 leads from the dp lnb for 119 & 110 to a standard 4 to 1 diseqc switch on #1 & 2. Run the lead from the 129 lnb to port #3 of your diseqc switch, and if you have an extra dish around, point it at 82 and run that lead to diseqc #4. Set your FTA accordingly in dish setup menu, using OCS-DP as lnb type for 110, 119, & 129. If your 82 dish is standard lnb hen set it also if you use it.
Voila! Perfect switching TV everytime & 140+ HD channels! It's not hard and using a standard diseqc switch in conjunction with DP or standard works fine. adding a 5th bird gets a little trickier, but can be done using this same setup and adding an sw-21 or 22 khz 2to1 switch into the mix. Hope this helps.
The best thing to do is run 2 leads from the dp lnb for 119 & 110 to a standard 4 to 1 diseqc switch on #1 & 2. Run the lead from the 129 lnb to port #3 of your diseqc switch, and if you have an extra dish around, point it at 82 and run that lead to diseqc #4. Set your FTA accordingly in dish setup menu, using OCS-DP as lnb type for 110, 119, & 129. If your 82 dish is standard lnb hen set it also if you use it.
Voila! Perfect switching TV everytime & 140+ HD channels! It's not hard and using a standard diseqc switch in conjunction with DP or standard works fine. adding a 5th bird gets a little trickier, but can be done using this same setup and adding an sw-21 or 22 khz 2to1 switch into the mix. Hope this helps.