izzypoo

New member
i have just pli screen, i can change channels but they all are the pli screen, wat happened? wat can i do? ideas?
 

BROWNNOSE

BOOTLICKER
ok izzy when you say you have pli screen are you meaning the set up or are you talking about when you are in boot mode, if in the boot mode seem to be stuck there are a few thing that it could be, 1 is your dish may of moved alittle and it will freeze, 2 see when you change the channel see if you have singnal strength SNR and AGC if you don't have or if it look like 1/2,, or nothing you will have to, 1st. check cable, switch, lnbs, if you can get into setup tool look at the bottom where the /var used 50% or high if it is in the 60 or 70 % you may have to reboot from start with factory and dream-up start frish if all cheak fails [you may have a tuner problem] i would try as manny thing as i could if you have any flashwizard back up try them too, if you need any back up for them just PM me i have all kind of trick in my bag, this problems has happen to me manny of times most of the time i get it back i few times i had to change the tunner. i have a # of boxes that i deal with hope this could help.

P.S i will check in time to time to see how you are making out if you need me at any giving time just PM me your time and i will be here to help you
 
Last edited by a moderator:
Top