New Webloader instructions

New Webloader instructions

How to use Web Loader

Lots were asking for this,so here ya go

It is best to set channel to DN 100 or B3V 198
The webloader works best on open channel or do a factory default before you start wedloader

For Internet explorer start at Step 1

For Firefox start at Step 2

Step 1
Open Internet Explorer > Click on tools > Click on Internet Options
In the Internet options screen > Click on the Advanced tab
Scroll down to HTTP 1.1 settings > uncheck the following
Use HTTP 1.1
Use HTTP 1.1 Through proxy connection > press OK

Step 2
On the Internet explorer address bar or Firefox address bar
Type your STB IP Address ( the top address in network Information)
Press OK

Step 3
User name: admin
Password : 0000 (Default)

Step 4
You should see Web Loader interface > click browse
Brows to the file you want to download. Make sure the file is unzipped. Web Loader only loads software , not boot files > click Open
Click on Upload File

Step 5
You should see the screen that tells you
Upload completed
System reboots after flashrom writing
Please wait 25 seconds

Step 6
Watch your STB it should reboot
When it comes back on > Press Menu >System Settings > S/W Version
You should see the new version



Thanks goes to My friend Skyview from Tvkeys.

How do I find my STB IP Address? What do you mean by the top address in network Info?

What about "Tor" web browse option?

I tried step 1-3 but in step 4 i don't see Web Loader interface.. what else can i do..
i need this.