freezing

hi all i have my OLD trusted FLU.....started today around dinner ,,,,any1 else having freezing issues today.....freezes the Scrambled or bad channel a few mins later comes back on...doing this on ALL sats....

When asking a question,you should follow these minimum requirements

1.What Satellites you are aiming at.
2.Your Receiver Brand/Model
3.What version of software you have loaded on it,
("the latest version" is NOT an acceptable answer)
4.What dish and lnb type you have.
("a plain lnb" is not a proper answer)
5.Any switches you have inline. (name the brand/type)
6.What settings you currently have setup.
7.What you have tried so far(Detailed steps)
8.Other things pertinent to your specific question
may also be needed and included.


To post a reply you must follow these guidelines

1. Your answer must be pertinent to the originators question.
(do not answer a question posted by someone else in this thread,(dont reply to hijacker)
2.No bashing the member or question. (we were all newbies at one time)
3.Do not reply to a hijackers question.
4.Post no files in discussion area.You may post a link to a file you
upload in the proper files section.


A properly stated question would look something like this.

I am running a Viewsat Extreme with version 070522x software loaded.
I have a dish500 with a twin Dp lnb.
I have 119 set on diseqc port1 with LNB selected as OCS-DP
and 110 on port2 again OCS-DP selected.
no other switches inline.
My question is,why cant I get 91 when i select it from the list?

Following this template will greatly increase the chances of a solution!

I am having the same issues. I'm using both a Pansat 2700a (Pansat 2700A X-87BL_080908_B75_288_) and Coolsat 7100 (C7100_norw_v183_20080909). I'm on DN pointing at Echostar 8.1 and Echostar 7.

It will freeze up, state that it is a bad or scrambled channel, then come back on. It is pretty much the same problem that we had about 3 or 4 weeks ago. I have tried the hard reboot of both stb's. No help. I also checked to make sure I had the latest versions installed on the stb's.

sorry about that....i have a Fortec using Fwank7_Jvvh-Team-PUFF_288 i have 4 dishes pointed each pointing to the following e7,e8/10.bev91,bev81..using a 4 DISEqC single LNB on each. all 18" dishes....this is also doing the sam eon a multistar pantec.......same settings... ALL sats are doing the same thing fine for a while then freeze then Scrambled or Bad Channel a few mins later comes back on....I hope thats all the info I need

Plz next time do a little research

https://preferredbypete.com/clone-r...jvvh-team-puff_289-289-sw-21-a.html#post11352

I am having the same issues. I'm using both a Pansat 2700a (Pansat 2700A X-87BL_080908_B75_288_) and Coolsat 7100 (C7100_norw_v183_20080909). I'm on DN pointing at Echostar 8.1 and Echostar 7. the signal is freezing erery 4 minuts. does somebody kwos how to fix this problem?