hunkyspunky
New member
hi all my first post since joining ...just getting back into fta i have an ilink 9500hd coming this week but i am confused.... which hd board do i get the 8psk board or the sk200 chipset tks for replys
[Confused!] ilink 9500hd
- Thread starter hunkyspunky
- Start date
- Status
Most are using the 8PSK Board that was being used in the NFusionHD Receivers.
hunkyspunky
New member
tks for reply on you tube it shows taking out a smaller module like the sk200 vs max hd module do i need to do this tks again
Following is a C&P-----Author Unknown
There seems to be an issue on the new ILink9500HD:
The new version of iLink 9500HD is now coming with a new SK200 NOT the Broadcom one.
It is a Availink AVL2108 chip http://www.availink.com/product1.aspx?id=2
It is supposedly better than the "older" broadcom.
It also directly conflicts with the nFusion 8PSK.
All the new receivers have to have this board removed if you are going to use the nFusion 8PSK board.
This is the small green board directly under the 8PSK board.
Otherwise you will go into "checking network" hell as neither card will work if they are both present.
hunkyspunky
New member
tks it cleared up alot it was confusing tks again
Scammer
Banned
its probably just like the board that came in my VS9000HD i had to remove it to install 8PSK board. it plugged into the same place as the tuner board. there was no way to have both boards hooked up.the tuner board never did work and was a useless part far as i am concerned.i keep mine in a box in case it ever has a function in the future.you would think i-link would have a 8psk for there unit like VS,SV,Captain has there own boards wont work elsewhere.seems strange it works with a nfusion 8psk.perhaps that's why there are issues?
ILink found no reason to mfg their own board as the VS 8PSK Board and the NFusion 8PSK Board both work in the ILink 9500HD units.
Scammer
Banned
where you get that info?? thats like saying chevy sold a new 4x4 truck but found no reason for making a transmission cause ford and dodge transmissions will both fit...lol. snowbird told us her nfusion 8psk board works in vs9000 and il 9500. so that means both the newest HD units are using VS 8psk board. the original 4 HD boxes had there own 8psk boards not compatible with each other.VS,SV,Pansat.Captain all had there own 8psk cards.The only reason nfusion and ilink are feeding there compititon (VS) for the 8psk board is they dont have the smarts or tec. to make there own.why make a box that wont work unless you buy another companys parts. not a smart move on there part. but we have gotten off topic on the original question.
What is the point of having this SK200 board in there, does it work
with some other board rather than the Nfusion 8PSK, if so does
anyone know which one?
Why was it not a smart move on their part.?????
Why pay for R&D of a product that is already being Manufactured.????
Guess ILink could have bought these already manufactured 8PSK boards and put their name on them.
All these boards are built in the same factory FYI------The name of the company is Irumtek ----and they build most of the FTA receivers and dongles as well.
Scammer
Banned
SK200 8PSK MODULE BOARD FOR VIEWSAT MAXHD ILINK 9500 HD
* Brand New 8PSK Module compatible with the VIEWSAT MAXHD, I-LINK 9500 HD, KBOX K2 HD.
About the Product:
Optional upgrade kit to receive DVB-S2 Plus (8PSK) Free To Air Channels Only.
its only use is for true fta channels, no need to have it in there with a 8PSK board.
* Brand New 8PSK Module compatible with the VIEWSAT MAXHD, I-LINK 9500 HD, KBOX K2 HD.
About the Product:
Optional upgrade kit to receive DVB-S2 Plus (8PSK) Free To Air Channels Only.
its only use is for true fta channels, no need to have it in there with a 8PSK board.
BROWNNOSE
BOOTLICKER
Excellent info guys and gals! I am thinking about a 9500, this helps a lot.
I got yo Agree with "Viper" We have some great info here with these systems,, I do beleave this thread have ran it's time,,
when you receave your system "hunkyspunky" and need help setting it up we will be here to help,,
GOOD LUCK "hunkyspunky" we'll leave the lights on for you!!
This Thread will now be Close by BUTTMAN302
- Status