[Confused!] Ilink IS-9000+ on PS (NEED HELP PLEASE)

asislife06

New member
I have an Ilink IS-9000+ i have a donation code for NFPS im trying to get it up and running to no avail! :confusion: I have everything setup right and Ive tried every file I can to get the Private Server running! any help would be greatly appreciated!!
 

askendria

New member
I have an Ilink IS-9000+ i have a donation code for NFPS im trying to get it up and running to no avail! :confusion: I have everything setup right and Ive tried every file I can to get the Private Server running! any help would be greatly appreciated!!

If you have file 1447 in your unit so let you start by:
1) click power in remote.
2) then Menu.
3) one click in left arrow (system confi...)
4) click system confi....
5) down to cccamd&new camd and change it to "ON"
6) click menu in remote then click left arrow 2 times to tv channels
7) down to network setup and click ok
8) down to server setup and click ok
9) click ok on server 1
10) enter the info. you got using remote such as domain, port, user name, password and last deskey
11) last thing press blue key in your remote (Apply) and that will save info. you entered.
12) press or click EXIT and exit to return to main screen.
13) reboot unit from the back
14) if you have done channels scan you will get tv
15 ) if the information you entered in server setup are correct you'll get tv.

Good luck
 

asislife06

New member
I have loaded the 1447 followed the steps and still nothing! Its as if its not even connecting to the server! I have two different PS's and neither one is working! I was going to try the OCT private server file but for some reason that's the one file that wont load on my unit! any ideas?? Im on August 23 2011 SV 1447 Boot version 0018 JAN 27 2010
 

asislife06

New member
OK I got it up and running! I had to put in the server IP instead of Domain name and voila!!! Thank you askendria!!
 
Top