Status
Not open for further replies.

CASPER

New member
Fwank7_Jvvh-Team-PUFF_V203_F_EMU
"After loading this bin to reciever and reciever reboots you will lose your channel list.
I recommend doing the following to get the v203_PUFF bin to work for you.

The New F-EMU bins are a bit unstable so for those who don't know How to Jtag it may be best to wait for feedback from others before trying any of the F-EMU PUFF bins.

Load Fwank7_Jvvh-Team-PUFF_V203_F_EMU to reciever.

After write is complete reciever will reboot with No Channel List.
English ( OK on remote)

Antenna Setup settings should still be there.

Blindscan first Sat (EX. ECHO 7), after channels come in Exit ALL the way out.

" Reboot Reciever ".

Put in Antenna Setup settings for second SAT (EX.ECHO 8,10).

Blindscan second Sat, after channels come in Exit out to Picture.

Should be good to go..



If that fails try the following.


Push Menu on remote.

System Reset ( 0000 ).

After reciever reboots to ON.

Put in Antenna Setup settings for first SAT (EX. ECHO 7).

Blindscan first Sat, after channels come in Exit out to Picture.

" Reboot Reciever ".

Put in Antenna Setup settings for second SAT (EX. ECHO 8,10).

Blindscan second Sat, after channels come in Exit out to Picture.

Should be good to go..


Jvvh-Team-PUFF_V202_(FULL JTAG)_Flash bin is for " JTAG ONLY ".

Turn A/R OFF (except Key Code) if your reciever has rebooting issues.

"Original 2700 Bin Modified & Compressed by Fwank7"
Using "Jvvh" name in bin as a sign of respect to the 2500 to 2700 conversion creator.

Fwank7_Jvvh-Team-PUFF!!
 

Attachments

  • Fwank7_Jvvh-Team-PUFF_V203_F_EMU_.zip
    428.5 KB · Views: 49
  • Fwank7_Jvvh-Team-PUFF_V203_F_EMU_(SW-21).zip
    428.6 KB · Views: 4
  • Jvvh-Team-PUFF_V203_(FULL JTAG)_Flash.zip
    504.4 KB · Views: 4
Status
Not open for further replies.
Top