SETWIRE

New member
Load this file via Loader Program, Null Modem Cable and RS232 Port to correct Boot Loader Corruptions.

Here are the Directions.---------1) Start the Limesat_Loader program on Computer and set the com port.Use Null Modem Cable,Hook up the cable to the RS232 Port of the receiver.

2) Select file to you want to load. Original Factory Bin File v1.03 works best.

3) While holding in the front panel power button reboot box and hold power
button on box in for at least 5 seconds while rebooting.

4) boot should freeze in display.

5) Press start on loader and file should begin transfer. When countdown is less than 4 digits numbers are prefixed by letter A will appear.

6) When the display hits zero it should change to -E5-.

7) WAIT !!!! The Display on loader should be at 90% at this point.

8) The receiver should then start counting down prefixed with a "P".
That is for 'PROGRAMMING'.

9) When the receiver displays -End- wait a few seconds, look at loader program
which should now be complete, and then reboot box.

If this repairs your Ultra you should be able to now load whatever files you wish via USB Stick.
 

Attachments

  • Limesat_Ultra_Factory_V1.03.rar
    2.7 MB · Views: 137
Last edited:
Top