Limesat_Ultra_v264_05092011

Limesat_Ultra_v264_05092011


Limesat JAPAN - Free Trial

Limesat Japan Group is a new group who is going to support Limesat receivers. Users have waited long enough for Limesat to come back and now it looks like they found a support group who can handle their customer base.

Limesat_Ultra_v264_05092011.bi n will require a serial number / warranty code in order to allow you to connect to their server. 16 digit warranty code will come with all Limesat Japan Receivers. However those who have older units will need to go to LimesatJapan.com to get the free trial code.

Over 750 Channels up and running strong!

EvilOne you for got to add the Rest of the Info but here it is..


PS: Limesat Japan Bin 264 is a Patch Bin and requires either Factory Bin to be loaded or any Bin from 253 to 262 to be preloaded

Loading Instructions for the new Limesat Japan Bin 264 on a Receiver that was already running

1) With current Bin installed, Do a factory default
2) Menu PVR USB and load Bin 264
3) Go to Menu, Network Settings, Limesat Japan Public Server
4) Enter Trial Code from LimeSatJapan | Just another WordPress site
5) If not able to enter code, Do a Factory Default, Rescan the satellites
6) Server Must Server Must show on.
7) Wait a minute or so and the Server should connect and display a CAID number

Go to CH 200 and you should have Picture

If this is a New box or if you experience Problems

1) Load Factory Bin 1.03
2) Load Bin 264, do a factory default.
3) Scan your Channels, ensure CH 101 has picture
4) Go to Menu, Network Settings, Limesat Japan Public Server
5) Enter Trial Code from LimeSatJapan | Just another WordPress site
6) If not able to enter code, Do a Factory Default, Rescan the satellites
7) Server Must show ON.
8) Wait a minute or so and the Server should connect and display a CAID number

Go to CH 200 and you should have Picture