CASPER
New member
VSHD Loader(v1.1) User Guide
"Loader" can download the firmware from PC to STB.
1. Install "Loader" to your PC.
2. PLUG OUT YOUR STB FROM OUTLET.
3. Connect "NULL MODEM CABLE" between PC and STB.
4. Run "Loader" on PC.
5. Press "Configuration" button and select serial port what you use
6. Press "Open " button and select the file what you want to download
7. And then press “PC->STB” button.
WHEN ZMODEM WINDOW IS APPEARING, TURN ON YOUR STB.
8. Then selected file will download from PC to STB.
9. When download is complete, you can see below message.
When you see this dialog on PC, STB will start to write flash memory.
Please wait until STB automatically reboot.
"Loader" can download the firmware from PC to STB.
1. Install "Loader" to your PC.
2. PLUG OUT YOUR STB FROM OUTLET.
3. Connect "NULL MODEM CABLE" between PC and STB.
4. Run "Loader" on PC.
5. Press "Configuration" button and select serial port what you use
6. Press "Open " button and select the file what you want to download
7. And then press “PC->STB” button.
WHEN ZMODEM WINDOW IS APPEARING, TURN ON YOUR STB.
8. Then selected file will download from PC to STB.
9. When download is complete, you can see below message.
When you see this dialog on PC, STB will start to write flash memory.
Please wait until STB automatically reboot.