moo2

New member
hello all,
im a newbie. im trying to dl the latest bin for 2700 clone. when i click on write. it trys to start downlowing and then it will not go past 0%. and then it says write failed. im using a 9 pin. female plug to female plug from radio shack. can anyone tell me what am i doing wrong. also please tell me what is the latest bin for my pansat. i searched for my answer, and came real close to the answer but no luck, i tryed everything that i researched. i have all channels, but ppv, and x. thanks alot everyone.:goofy:
 

Rumas

Administrator
Staff member
The latest 2700 bin is here: https://preferredbypete.com/2700/1677-pansat-2700-220v1-nov-3-2007-a.html

Try changing com ports. Have you programed with that cable before? Is the com port setup on your computer?

There is 2 types of serial cables:
1) Straight Through Serial Cable DB9, female to female connection. RS-232 cable.

2) Null Modem Cable DB9, female to female connection.

Both look exactly the same! It may tell you on the side of the cable which one you have.
 

moo2

New member
im using rs-232. it brand new. have never dl on this computer before, tryed changing com ports, com port 2,3,4 not reconized. com port 1 is on. i checked that under f2 at the start up menu on my computer. i think my cable is 1-1, 2-2, 3-3, 4-4, and so forth. thanks for your help, but im still lost
 

moo2

New member
i tryed dloading the latest bin, using the latest loader. it would not dl. just had b 7 5 across screen, need help bad please help.:No:
 

moo2

New member
big help please

i dl the bin from 10-31. and it worked for alittle, and the everything went out. the front of the receiver dont come on anymore. is it fried. i need help big time please.
 

Rumas

Administrator
Staff member
Its going to need to be jtagged now. The 10-31 bin is not clone safe. If its a clone like you said in the first post. You must make sure you load ONLY clone safe bin on it. My first post in this thread has the link to the right bin.
 

moo2

New member
thanks for all your help. i read up on jtagging. it looks scary. besides making it myself. were can i get the jtag cable? can i buy it from someone? it seems as, if i get the cable, the jtag process is not that bad. thanks for all your help.:dull:any other advice you have for me for jtagging
 
Top