nfusion solaris

i just bought a new nfusion solaris disconnected my nova and hooked up the soalis installed new bin with cable worked for a little while then dump the 151 bin and went back to the 150 bin reloaded and same thing happened any ideas would be appreciated????

i just bought the solaris myself and i can't get the thing to work at all
i loaded boot 130, factory u27 and the 151.bin nothing...can you tell me what i'm doing wrong?

what d**h are you pointed at did you set up each d**h ? give more info on setup or how you have it hooked up

110/119 lnbs and pointed....i accidentally erased the original factory file....so using loader 131 i loaded boot file 130, followed by factory u27, then loaded most recent bin 151.....d%&h is pointed right cause i can scan over 600channels and get full signals...very few channels of audio....so it must be the prgraming.....sol i guess

do you have rca cables hooked to back or componet cables
also it said to use the factory boot just download new bin

does yours show 151 bin or 150bin?

i've been using component cables...so just load the factory bin with the 3rd party bin afterwards??
i didn't get instructions with mine

it shows 150.3

can you try b*v 91 nim 1 and is the red light on has to be hooked to the internet to work

i can't try b%v because my dish is set for 110/119

what channel are you on 300 works on d**h

YardApe32 said:

it shows 150.3

Click to expand...

https://preferredbypete.com/other-receivers-files/15611-090623_sol_phoenix_sd_v151_0-a.html You have to load this file for d!sh to work