sonicview 8000 server

Tried diffrent ip server and none seem to work. Says scrambled no service. Does any one have idea where to find working ip server address ? thanks been down for a while .update to wiz 2.2 file 512. any help is greatly appricated, thanks

can not get ip config on reciever.. lights are both on wm

in wiz
ip config method static
local ip 192.168.0.xxx port 80
subnet 255.255.255.0
gateway 192.168.0.1
ppp0e blank
password blank
server ip 0.0.0.0 port 9999 or port 1920
operation mode mixed
use dns unchecked
dns server ip 192.168.0.1
domain name *****

new bin won't pick up ip config. Don't know why ??

DID YOU LOAD THE FOLLOWING FILE'S ????????????????????????

https://preferredbypete.com/8000-hd-files/22118-sv-8000hd-_-newlink_hd4-improvement-fix.html

https://preferredbypete.com/8000-hd-files/22112-sv800-newlink-v-1-2-a.html
























.

no, i did not ,though i dont have the new link hub ? i need those files ?

loaded files, still no ip conf.

prsjuan said:

loaded files, still no ip conf.

Click to expand...

No IP Config means No Ihub connected or the ihub has ver 82.( Bad situation, you need to unbrick it)

Try rebooting everything router, modem, pc and stb. Start from there.
If still the same check the wiznet try to search the ihub, check what ihub ver in top left.

rebooted systems same thing, have version 2.2 wiz.. anyother suggestion ? looks like it only picks it up file 479 or 492

hey prsjuan sometime you might have to just let it set on a channel like 239 for awhile I read where it took a few hours???
like I said I never tested this system but was able to help other out anyway..

ok, thanks will try that