BROWNNOSE
BOOTLICKER
Entering serial number for iHub
The serial number for the iHub is in hexi-decimal. Hexi-decimal (commonly referred to simply as "Hex") only has 16
characters. They are the digits 0 through 9 and the letters A through F. If you look at the serial number for your
iHub you will notice the letters are small lower case letters and may be hard to read. For instance the letter "e" may
look like a letter "o" with a slash through the middle. The letter "a" looks like a circle with a flat bar on the side of it.
When you go to the setup screen for entering the serial number look at the bottom of your screen and you will see a
key for which remote buttons to use for the letters. It will look like this initially "FF.FF.FF.FF.FF.FF.FF.FF". Now just
simply enter them and hit "apply" and you are done. This is located in "IP Config".
You can take a picture of the serial number also then move it to you PC and use the zoom function on your PC to
see the S/N much easier. Many members have done this.
Below is a picture of the SV 360 Elite Remote Control Unit with the letters labeled onto the pvr function keys.
hope this helps
good luck all
B hunter
The serial number for the iHub is in hexi-decimal. Hexi-decimal (commonly referred to simply as "Hex") only has 16
characters. They are the digits 0 through 9 and the letters A through F. If you look at the serial number for your
iHub you will notice the letters are small lower case letters and may be hard to read. For instance the letter "e" may
look like a letter "o" with a slash through the middle. The letter "a" looks like a circle with a flat bar on the side of it.
When you go to the setup screen for entering the serial number look at the bottom of your screen and you will see a
key for which remote buttons to use for the letters. It will look like this initially "FF.FF.FF.FF.FF.FF.FF.FF". Now just
simply enter them and hit "apply" and you are done. This is located in "IP Config".
You can take a picture of the serial number also then move it to you PC and use the zoom function on your PC to
see the S/N much easier. Many members have done this.
Below is a picture of the SV 360 Elite Remote Control Unit with the letters labeled onto the pvr function keys.
hope this helps
good luck all
B hunter