[General Question?] Sonicview eite ihub version 418 (new file)

Hello, has anyone tried the new file v 418 from this website? I tried it, it solved the "Software update" error but it did not detect the ihub. So it is not working. When you go to Menu, Installation, you don't see "Ip Config"

ok, The file is working but the problem is with ihub

The hub should be updated to 2.3 with this file as it loads. Re-load the file and hard boot 2 times and just wait on one channel for at least 10 minutes. Should detect and update hub and roll in.

Hey Guys how are these new files working did it stop that message things on the channels???

Yes, the v418 worked perfectly on my friend's receiver.
I have a problem with my ihub maybe it died. The receiver no longer detects the ihub. The Wiznet also cannot detect the ihub.

alluoshi said:

Yes, the v418 worked perfectly on my friend's receiver.
I have a problem with my ihub maybe it died. The receiver no longer detects the ihub. The Wiznet also cannot detect the ihub.

Click to expand...

Did you try to reboot dsl or what ever your using to the net and check your cat5 wire?? sound like your not connected to the net.. I like to see if we could get you working,,

check out those things and if you could maybe give us alittle more info,, don't give up yet,,

I'll be back in a hour to help you or if anybody can jump in

Yes, I checked everything possible. The Internet and the utp cables are working properly. Neither the receiver nor the Wiznet software detects the ihub. I also installed the v417 bin with no success. I also found something strange. When I connect the ihub to the receiver, I see the orange light blinking and the green light on even without connecting the utp cable to the ihub.
I am not sure if I can get this problem fixed.
I appreciate anybody's help.

OK buddy here a how to link,, there are some good info that just might help you..

find what you need and just take your time,, go as baby step 1 step at a time,,

https://preferredbypete.com/sonicview-discussions/24315-need-more-help-sv-360-p.html

also here a short how too done by "dells"

https://preferredbypete.com/sonicview-discussions/24398-dells-how-too-sv-premies.html

I was updating my sonicview to v418 but i can't see channel only said No service or scrambled. I was uploading factory file next step sysclean later upload bin 418 and don't work. Can help me?

Go to Menu, Installation and check if you see "IP Config". If you are not seeing it then you have problem with the ihub.

i see it ! i was in menu, installation and i get it "Ip Config" on public and at "Version Information" i've main software 04.18P and boot loader 01.00 product SV-360Elite PVR but i can't see tv and my ihub is 2.3 ihub type 5e

check your mac address with wiznet if your mac is 00:..is good but start with other number is corrup

where is the mac address??

Okay i do it my mac is 00:90 ....... it's correct but not channel and i see on Wiz port 1920 and port 1920. What can i do?

I cant see my i hub at all and i feel like i am tring everything! please help me I have a sonicview 360elite,

leave on channel 200 it will come on did you up date your ihub as well ?????