Updated newlink conversion for 360 Premium

Status
Not open for further replies.

Scammer

Banned
Updated newlink conversion for 360 Premium

use at own risk

Making a hub into a Newlink is easy
This is for a Premier
I'm writing this as I do my third one.
This Hub was originally 2.3 and had to be reverted back to 2.2 first.

You need V12 file for receiver as well as P11 and the latest receiver files
You need V11 file for the ihub.

Open your receivers ipconfig menu and make sure it works and the serial number is ok.
Then open wiznet and search.
The hub must be version 2.2. Failure to load issues occur if you miss this critical detail.
If it isn't 2.2 then find the post which deals with your situation.
If you are 2.3 it has to revert, for the others at 1.4 or 1.9 upload the 2.2 file to the hub.

UpLoad the V11 file using Wiznet.
After processing is complete. Search again and it should be version 1.1
Now, Unplug the Lan cable. The router one with the receiver still turned on.

Load The V12 File as S/W Update to the receiver with the USB and Reboot it
There will now be no Ipconfig menu.
Load P11 file to it now and reboot it.
Shut the receiver off at rear
Hook the Lan cable up and Reboot it.
If it hangs on the Don't switch off window give it a minute to see if it works it out or just reboot it again.
Success is spelled Network adapter Connected
If the server is ok then you should be watching TV .


View attachment Updated newlink conversion 360 premiere.zip
 
Status
Not open for further replies.
Top