receivers

  1. M

    XX-CLIENT v1.14 For Windows with CNX & Viewsat. Use IKS without dongle/hub only serial cable

    Credits goto goofather im just spreading the good news. I've tested with my old cnx nano that was in the closet for years. Using linux can be a pain for some so here's a windows app that works great !! XX-CLIENT v1.14 For Windows with CNX & Viewsat Supoort DESCRIPTION XX-CLIENT is...
  2. S

    4DTV C-Band

    In case anyone has a 4dtv receiver that they haven't sold yet there is a guy in Chicago under the name C-band Forever/ Glentech who is advertising that he replaces batteries and remaps these receivers. He has burned countless people and it has been documented on many FTA sites on the net. If you...
  3. S

    Hi

    Hey everybody I am new here but would like to help and get help. I have a bunch of C-band satellites and receivers that I am always tinkering with.
  4. U

    [Problem!] Hi and help needed

    Hey Everybody This is my first post and wanted to say I've been browsing around this forum and it is great!. I was an avid tester awhile back until Charlie killed the waves. Now I finally cut the cable with commiecast and am dusting off my old fortec receiver and want to get some fta channels...
  5. T

    Viewsat Ultra trying to setup with win xp pc how to do

    hi guys i need your help, i got viewsat ultra receiver with win xp pc i am trying to setup all with rocket code. I am using Null Cable on my PC to VS Ultra. 1)-so i loaded this 3 files on vs ultra successfully PFTAUSW-100318U PFTAUSW-100322U PFTAUSW-100320U 2)-i use this also wfemu-0.2.2, then...
  6. J

    hi i have a problem like everybody else

    How u doing guys!! im new in the fta world and i have an issue with my azbox bravissimo, i added new transponders nagra 3 and set iks support after that my deco freezze and never turn on again only power led is on, no remote and neither buttom response i tryed erom, azloader, upgrade etc, and...
  7. L

    Curious

    Curious to know why latest files for some receivers are not being posted.
  8. S

    A brief introduction

    Hi All I have been involved with satellite delivered content since the C-band days. I am a Hughsnet certified installer/tech and have passed a course in network engineering. Currently I do some FTA receiver testing and volunteer a couple of days a week at a computer recycling facility building...
  9. D

    iks for dummies

    trying to get back up to speed here.. (haven't watched tv shows except through laptop and monitor since everything went down a couple years ago. i did try out netflix for canada but it's not really up-to-date and doesn't work with linux, kids can access it through their xbox, for me it means...
  10. S

    Limesat HD Air Cooling Fan Modification

    Here is how I modded my Limesat HD Air receiver to take care of the overheating issues with the LS400 Turbo 8PSK CPU.
  11. S

    Latest Guide For Setting up DreamlinkHDS receivers

    Here you go --Updated Guide.
  12. CASPER

    DL_HDpvr_108_0329

    DL_HDpvr_108_0329 Release Notes: Added Feature- Server Setting remains after Factory default. If you wish to delete server settings, use make2dream or load factory version and do Factory Default at menu. Added Feature- Data store to USB : You can now select between all, server setting, and...
  13. mike_winnipeg

    [General Question?] transponder settings

    I have been reading and the transponder settings i have found when you are first setting up your dish and box is as follows. transponder settings 12224 for bev 91 + 82 and dish 110 , anf for dish 119 you change it to transponder 12239. I have used these setting but my signal and quality have...
  14. askendria

    Attn. GOOD NEWS TODAY AT 11:00PM SHARP

    GOOD NEWS TODAY AT 11:00PM SHARP ESTERN TIME Your wait is over...Get your old STB's even dug out the FTA boxes you buried in your yard years ago or get back your receiver the one you gave your mother in law. A new master file/bin for all receivers will be released today April 1st, 2012 at...
  15. askendria

    Iks server service list

    IKS Server service list: Know the following first before getting a server service At this time no public server services available. Some of these servers service are available for everyone. While other servers service are referral only. Some servers has website and some don’t. All in the list...
  16. F

    VS Ultra WFEMU issue not communicating with software

    Im not sure what im missing here but my setup works fine with my VS 9000, I connect my ultra to the same setup and its not communicating with the box. When i go into serial setup>Network s/w upgrade it shows New software DX-X00-N APP 2.00.19 and Tekz Windows WFemu, and on the WFemu i can see...
  17. askendria

    The new ILINK SMART receiver

    Features: MPEG2 MP@ML, MPEG2 MP@HL Favorite Channel Groups Component (YPbPr) Video Output Support Mono, Stereo Audio Output Support DiSEqC 1.0, 1.1, DiSEqC 1.2 Motor and USALS Control Compatible Support for 16:9 and 4:3 video picture aspect ratios Channel Switching Time less than 1 sec Max...
  18. askendria

    IKS Servers Status March 17 2012

    IKS Japan - AKA Akai Japan public & private Server (DOWN) *Rocket private DN - UP / BEV - (N/A) DN International - UP *NFPS private DN - UP / BEV - (N/A) DN International - UP *Above servers may run in limited channels, make a note of it if a channel is missing. Yesterday was a black out...
  19. S

    New Ilink SMART Receiver Bin File.

    Here is the 1st bin file released for the new Ilink Smart Receivers.
  20. S

    New Receiver Ilink9600HD 1st bin file released.

    Here is the 1st bin file release for the NEW Ilink 9600HD Receivers. Don't use this bin on an Ilink 9500HD receiver.
Top