BROWNNOSE
BOOTLICKER
Recently, I bought an additional PowerColor AX6950 2GBD5-2DH Radeon HD 6950 to crossfire. It seems that it's operating okay apart from once I try to play a game title I get a BSOD. The entire system was assembled May however I also just brought my system board up-to-date(because of failing SATA connection) and also got a brand new CPU heat sink to ensure that I'm able to overclock when I have worked al the kinks out. In any event, specifications are listed below:
Case: Cooler Master Centurion 5 II
OS: Home windows 7 Ultamate 64bit
CPU: Intel i7-960
Heat sink: Nuctua NH-U9B
Mainboard: ASUS Rampage III Formula
RAM: 2x 8gb Kingston DDR 3 2200MHz
Graphics Card: 2x PowerColor AX6950 2GBD5-2DH Radeon HD 6950
HD: OCZ Vertex III SSD 120gb SLD3-25SAT3-120G (Primary)
HD: Western Digital Black 2tb (Secondary)
PS: OCZ fatal1ty 750 Watts
After I switched my mainboard out I did not re-install windows 7 Ultimate because I did not think that might be an issue because of same chipset and I'd approach that only as a last measure to ascertain if that fixes the issue. I searched all over the net and i can't find anything relating to this problem. I have re-installed the system drivers, both cards work correctly when I have checked them individually as well as the board seems to identify both cards in crossfire mode within the Windows System Information (2GB of devoted graphics memory). Any assistance or suggestions will be vastly highly valued!
Case: Cooler Master Centurion 5 II
OS: Home windows 7 Ultamate 64bit
CPU: Intel i7-960
Heat sink: Nuctua NH-U9B
Mainboard: ASUS Rampage III Formula
RAM: 2x 8gb Kingston DDR 3 2200MHz
Graphics Card: 2x PowerColor AX6950 2GBD5-2DH Radeon HD 6950
HD: OCZ Vertex III SSD 120gb SLD3-25SAT3-120G (Primary)
HD: Western Digital Black 2tb (Secondary)
PS: OCZ fatal1ty 750 Watts
After I switched my mainboard out I did not re-install windows 7 Ultimate because I did not think that might be an issue because of same chipset and I'd approach that only as a last measure to ascertain if that fixes the issue. I searched all over the net and i can't find anything relating to this problem. I have re-installed the system drivers, both cards work correctly when I have checked them individually as well as the board seems to identify both cards in crossfire mode within the Windows System Information (2GB of devoted graphics memory). Any assistance or suggestions will be vastly highly valued!
Last edited by a moderator: