alanpolus

New member
my receiver was zapped and i downloaded the new loader2.1 and its till not working , what do you guys think i should do, may it be because i didnt update the software.
i need help to open the receiver again its just showing no signal
if you have an answer for me please post it for viewsat extreme so i can uploaded on my receiver
thanks
alan:chatterbox:
 
Last edited by a moderator:

alanpolus

New member
my receiver was zapped and i downloaded the new loader2.1 and its till not working , what do you guys think i should do, may it be because i didnt update the software.
i need help to open the receiver again its just showing no signal
if you have an answer for me please post it for viewsat extreme so i can uploaded on my receiver
thanks
alan:chatterbox:
i will try to upload a new channel list like domm advised and see how it will work
thanks domm
sorry i couldent upload any of the new channel list that you gave me
what is the next solution to fix this problem
take care
 
Last edited:

FTA Hacker

New member
Your switch might be wrong. Go to antenna setup and check the diseqc settings. Make sure you have the right numbers set.
 

darklist

VIP Member
you must have the last up date file to download to your receiver and if the loader is not load the file ,than you have 1 of 2 problem the cable is bad or the comm setting is wrong , but if have already the correct file into the receiver than check you diseqe switch try to go from the lnb to the receiver and tray one of the free channel like channel 100,or,407 GoleTV on echo110 or channel 101,or262 or all other free channel from the satellite you have ,, and if all fine check your keys you may have them off for some reason , and i will post more up to date channel list on the site for you all members to as soon i have them done , check under channel list ,let us know


regards

darklist
 
Top