Status
Not open for further replies.

Haven

New member
I have downloaded the DBPSW 070717X but nothing happens. NO SIGNAL. I would like to know if someone can help me. I am new here and so maybe I am doing something wrong. I would really appreciate if someone answers me.
Thanks
 

Haven

New member
No success on fixing....!!!

I still have no signal, I did the antenna setup but couldnt find out how to change the KEYS. Can someone help me?
Thanks
Haven
 

darklist

VIP Member
You must have the latest updated file to downloaded to your receiver, If the loader is not loading the file, than you have 1 of 2 problem, the cable could be bad or the com setting is wrong, but if have the correct file on your receiver then check you diseq switch try to go from the lnb to the receiver and try one of the free channel like channel 100 or 407 GoleTV on echo110 or channel 101 or 262 or all other free channel from the satellite you have. If all is fine check your keys you may have them off for some reason, I will post a more up to date channel list on the site for you and all members as soon i have them done. Check under channel list. Let us know!


regards

darklist
 
Last edited by a moderator:

darklist

VIP Member
to change keys on Extreme

go menu
go to option and hit ok
turn the Autoroll OFF
exit one time and go to installation and hit ok
go down to code and hit ok
go to nagra and hit ok
change the provider to Dish by using the volume
left or right tell you get Dish 01 01 00
than go down and change you'r keys starting from the 08 line and ignore the 00 line
08 line
09 line
88 line
89 line
note,, do not change the number above only the line after it its 16 digit and use numbers and remote butem to change keys its showing in down on your screen how put the numbers and letters
after you finsh putting the new keys you hit Exit one time and hit ok to save and after that Exit all the way to watch TV

key Example like this

Key code
08 B8 59 DF CF 32 DD 87 6C
09 3B D1 37 03 07 60 30 6A
88 5B 27 8C AF D0 1E A5 A6
89 D7 74 3B A6 B4 21 17 97

hope this will help :cool:

darklist
 
Last edited:

Haven

New member
Nothing at all!!!

I am going crazy, the keys were right but now I hit the factory default button by mistake and I deleted everything. Sorry, but can someone help me again?? or either tell me where I can get the manual
Thanks
 
Last edited:

Domando1069

VIP Member
Haven
Do you have a signal from your dish to the receiver? That is the first thing you must have, before we can give you any meaningful help. Also with View sat you sometimes have to change the tip setting to get a signal. We will help you, but give us all the information you can, so we don't send you on a wild goose chase. We will get you up and running.

:cool:
 

Haven

New member
Still no signal on viewsat

Hello,

Here it's me again. I will tell you everything I have done so far

I've installed the Loader 2.1 and the DBPSW 0700108

The auto roll is OFF with the new keys code (I put the new codes on Nagra)

The installation - antenna setup is
Satellite - Echo Star 7
LBN Power - On
LBN Type OCS-DP
LNB Freq - 11250
22KHz - Off
TP Freq - 12224
Search option - All
DiSEqC 1.0 - Port 1
Motor - Off
Legacy SW - None

With all this done I got the channels in duplicate and I'm not able to change channels by the remote control, I have to go thru all the channels to get to the one I want.
Some channels I used to have don't appear but maybe I have to add the channels (I don't know how to add channels).
Do you know if there is an assistance service so a person could come to my house and solve the problem in case I can't get it done?
Someone wrote me to check if there is a signal from my dish to my receiver, but I don't know how to check it either.
I need help, pleeeeease!!!!

Thanks
Haven:sad:
 

FTA Hacker

New member
So you hit Factory Default on your ViewSat by mistake here is what to do:

OK
(Box will STILL hold the last *.PGM file you uploaded and your satinfo.sat data.
Unless you believe the satinfo.sat file is corrupted, there is no need to transfer this file back to your receiver.)

Your scanned channel area and the system settings (Password, time, antenna settings, etc) will be reset to defaults and will need to be changed to your desired settings.


Make sure you load the latest been bin file.

To get your channels back, delete all your channels and rescan for new ones.
Your can delete all you channels in the "Channel Edit" menu.

Then do a "Blind scan" under installation. Scan all of your satellites.

As for you remote I have no idea? Does somebody have an answer to this?

Hope you are running soon!
 

Haven

New member
Finally, it's working, not 100% but I am still trying to get some channels I used to have.
Thank you so much.
If you know how I can get an specific channel on I would appreciate
 

Haven

New member
How can I get some missing channels?

My viewsat is working now, finally! but, now I dont have some of the channels I most watch and before I had them. Is that a bin "thing" or something is not setup yet???
Thanks
Haven
 

Haven

New member
Please, can soneone help me ? I have sent messages and no answers!!!
I want at least an answer pleaaaasee!!!
Thanks
Haven
 
Last edited by a moderator:

Cobra

Administrator
It's not a "bin" thing. And there is no need to get angry. You are not the only one having problems getting their satellite working.
Did you delete all the channels and do a Blind Scan?
Also, have you changed your Sat list to All Channels? This is sometimes the problem.
 

Rumas

Administrator
Staff member
Have you blind scanned both echostar 7 and echostar 6,8? You need to scan both. Half of DN channels are on one and the other half are on the other. This may be why you are missing channels.
 
Last edited by a moderator:

Haven

New member
Well, I could get some of the channels but I am still missing the 111, 596 and 597, what can I do??? And I used to have them before. Please can you clarify it for me.
Thanks
Haven
 

Haven

New member
I've been trying to do all kinds of setups but none has seem to work, I cant get 4 channels I used to have. Should I do a factory default? or maybe something else, can someone give me a clue of what to do? Its been a week now that these channels are off.
Hope for an answer!
Thanks
Haven
 

Rumas

Administrator
Staff member
Try this Haven:

1) Clear the existing channel database by performing Factory Reset (Removes channel database not firmware).

2) Setup satellites with conventional port settings - Stay in this menu and select F2 or Blind Scan and this will pickup all existing channels that are active.

3) Do this for all satellites selected and this should bring all channels that are currently active to channel database.

Post here with the results.
 

Haven

New member
Rumas, Since I tried so many things is the conventional setup these ones?

Echostar 7 (119)
LNB Power ON
LNB Type STANDARD - OCS-DP
LNB Freq 11250
22KHz OFF
TP Freq 12239
Search option ALL
DiSEqC Port 1
Motor OFF (if none)
Legacy SW NONE


Echostar 6,8 (110)
LNB Power ON
LNB Type OCS-DP
LNB Freq 11250
22KHz OFF
TP Freq 12224
Search option ALL
DiSEqC Port 2
Motor OFF
Legacy SW NONE

I also have other questions, after doing the factory reset, setting up these ones up here (if they are right), should I turn off and on again the receiver on the back ? The keys I have been using is the ones from August 1st (are they correct?) Should I download the bin file again. In what order should I do all that, sorry if I seem so stupid but I always had someone to count on to do that and now I cant reach this person anymore.
Ohh, by the way, why should I do the blind scan instead of the F1 scan?

Thanks
Haven
 
Status
Not open for further replies.
Top