Welcome to PC & Home Electronics Forum!
A great place for help and reviews on computers, home electronics, cell phones, software and much more!

• » Computer Software Help
• » Computer Hardware Help
• » Home Electronics Help and Advice
• » Consumer Reviews

We are a friendly community for PCs, home electronic enthusiasts. Our community is here when you need help.
Don't hesitate to join us now and discover just what so many people are talking about!

YES! I want to register for free right now!
Results 1 to 5 of 5

Thread: Audio fix on Dolby

  1. #1

    Audio fix on Dolby

    I haven't been able to understand the fix sequence [do what in which order?]
    to be able to save Dolby audio with the latest bin A/R fix.

    I don't see a note on how to fix this and I've read and looked for it. anyone else having trouble with this?

    what's the sequence of events to do the proper install? update stb, scan sat, etc?

  2. #2

    Re: Audio fix on Dolby

    what model of viewsat do you have ? so we can help you with your question
    Please, DO NOT PM admins/mods for help. Ask your question in the proper forum so that others who have the same problem or question may benefit from the answer. Thank you.

    Read the rules here: Rules

    Latest Keys are here: Keys

  3. #3

    Re: Audio fix on Dolby

    VS Ultra 2000

  4. #4

    Re: Audio fix on Dolby

    dude, I had to do this to get mine to work . . .

    get the zip file: dsstester-V0119ULTRA-VIEWSAT.zip and do this . . .

    http://www.******.com/forums/b-fo...9ultra-viewsat

    carefull changing lnb settings though
    Last edited by Rumas; November 13th, 2007 at 08:55 AM.

  5. #5

    Re: Audio fix on Dolby

    The solution is you must use a jump drive and load the factory 1.19 bin over your 1.17 then you can load the Latest PGM bin. The 1.17 does not recognize the rs232 cable thus resulting in a failed load everytime. Here is what I did step by step.

    1. Load the 1.19 and Latest PGM bin on the jump drive

    2. Turn on the STB (back switch then power on using the remote) with the jump drive inserted go to Menu,System Information, Receiver Upgrade, USB, then find the 1.19 bin that you loaded onto the jump drive.

    3. Once you start to load it should take 10-15 sec then reboot automatically when it comes back up go back following the previous steps and then load the PGM bin it will reboot again. When it comes back up go to Installation, Antenna Setup and input your settings for 110/119.

    4. When that step is complete go back to Installation and choose Auto Scan once here hit the f1 and choose the sats that you setup in the Antenna Setup section i.e. 110/119. Hit exit then OK to start scan. Once done with the sat scan turn to any channel and let it sit for 10 min or so and wait for it to autoroll the keys and watch tv

    Files that are Needed.

    V0119ULTRA-VIEWSAT
    PFTAUSW-( Latest PGM )

    Sat 119: EchoStar 7
    1) LNB power on
    2) LNB Type (“OCS-DP” for DishPRO LNB, etc.)
    3) LNB freq 11250
    4) 22khz OFF
    5) TP freq 12239
    6) Search option ALL
    7) Disecq Port (1 or whatever)
    8) Motor off
    9) Legacy SW None

    Sat 110: EchoStar 8, 10
    1) LNB power on
    2) LNB Type (“OCS-DP” for DishPRO LNB, etc.)
    3) LNB freq 11250
    4) 22khz OFF
    5) TP freq 12224
    6) Search option ALL
    7) Disecq Port (2 or whatever)
    8) Motor off
    9) Legacy SW None

Similar Threads

  1. Limesat Ultra, no dolby digital out
    By nagman in forum Limesat Discussion
    Replies: 1
    Last Post: December 2nd, 2010, 06:37 PM
  2. [Not Working!] No video or audio
    By rascal7887 in forum Viewsat Discussions
    Replies: 6
    Last Post: July 6th, 2010, 10:15 PM
  3. Dolby Audio on DBPSW-071124U-2 ??
    By scuggers1 in forum Viewsat Discussions
    Replies: 7
    Last Post: November 28th, 2007, 09:24 PM
  4. VS Ultra2000 [save Dolby audio]
    By scuggers1 in forum Viewsat Discussions
    Replies: 3
    Last Post: November 13th, 2007, 10:19 AM

Tags for this Thread