Status
Not open for further replies.

flamethis

New member
Hey guys and gals,
Well Santa brought me a new VS Xtreme and I've been reading these type forums for about 2 months now getting prepared, but I have a question.

According to the sticky post here after you install the PGM is should display 0000 on the front, mine is showing 4000. It isnatlled the sat file and channel files no problem, but the PGM was last, it loaded 100%, then went to end, then went to install, then 4000. It's the number display that has me confused.

I used Loader2.1 and the latest files I could find here including the DBPSW-071222X
file.
 

flamethis

New member
Forgot to add I installed an opkey file aswell.

Now is this ready for Bev and Dish? Just need to re-aim the dhish for whichever bird and rescan correct?
 

archange187

New member
Hey guys and gals,
Well Santa brought me a new VS Xtreme and I've been reading these type forums for about 2 months now getting prepared, but I have a question.

According to the sticky post here after you install the PGM is should display 0000 on the front, mine is showing 4000. It isnatlled the sat file and channel files no problem, but the PGM was last, it loaded 100%, then went to end, then went to install, then 4000. It's the number display that has me confused.

I used Loader2.1 and the latest files I could find here including the DBPSW-071222X
file.

OK, now before toy programed it did you program some channels in it? I'm just asking becasue 4000 is an odd number to change to. Is there a viewsat hologram in the back of the reciever? Is the power switch vertial (up or down) or horizontal (side to side)? Is the power cord flimzy or a little bit thick??

I'm just asking these questions just to make sure you didn't recieve a clone for christmass. I had a few of them droped off at my hosue this year for repair. :)

-Angel
 

flamethis

New member
Angel, thanks for the reply, I did nothing to it other than take it from the box and hook it to the PC, it is from an authorized dealer, has the hologram,thick cord, and vertical switch.

I thought maybe something went wrong, but I rebooted my computer and tried it again with the same results..

Is there a factory bin here I can restore then try again?
 

archange187

New member
Angel, thanks for the reply, I did nothing to it other than take it from the box and hook it to the PC, it is from an authorized dealer, has the hologram,thick cord, and vertical switch.

I thought maybe something went wrong, but I rebooted my computer and tried it again with the same results..

Is there a factory bin here I can restore then try again?

Factory bis can be found at http://www.viewsatusa.com

Try this too, with a new box use and old program to program first. then work your way up to the current fix. Not all programs are a complete update some are just patches :p

Factory restore bin and then dl the fixes say from nov. then start loading the fixes in order.

-Angel
 

flamethis

New member
sounds good, is there anyway to know for sure that the bins are full or just patches?
My dish isn't going up till next Friday now, getting basic Bev so I can have something for backup when the files aren't working.

How is the latest 26th bin working for you?
 

archange187

New member
sounds good, is there anyway to know for sure that the bins are full or just patches?
My D!sh isn't going up till next Friday now, getting basic B3V so I can have something for backup when the files aren't working.

How is the latest 26th bin working for you?

Not really.. Just start with a bin the programs all the way. The latest 26th bin, i really notice no difference. But then again i am not one for complaining, I do run a full FTA system so i always have TV either on ly Legit SUB or FTA sats.

-Angel
 

avichuchu

New member
Hi. I need your help. For some reason I don't get the channels for the Boxing fights.(PPV) I dig get 13 PPVs movies, HBOs ,Cinemax and a lot of Baseball Channels. This past Saturday trying to get the Fight I pressed the botton Factory Default and then I didn't have any channels. I installed the Satellites again but I lost a lot of channels, including my PPVs and baseball channels. What do I have to do to get them back? I was so happy with what I had. PLEASE HELP!!!
 

archange187

New member
Hi. I need your help. For some reason I don't get the channels for the Boxing fights.(PPV) I dig get 13 PPVs movies, HBOs ,Cinemax and a lot of Baseball Channels. This past Saturday trying to get the Fight I pressed the botton Factory Default and then I didn't have any channels. I installed the Satellites again but I lost a lot of channels, including my PPVs and baseball channels. What do I have to do to get them back? I was so happy with what I had. PLEASE HELP!!!


You realized you replyed to a post that was last posted in 2007...

I'm more then happy to help but pressing the factory default button is like staring out from start. reload and start over..

-angel
 
Status
Not open for further replies.
Top