[Warning!] How to Get Running Again info and photos

"c and p

I will try the best I can to help you out here.

The first place I went to in my router is under the Status>LAN of my router administration page. On this page, I can see the Static clients one of which is my WF :

Active Clients
Host Name IP Address MAC Address Conn. Count Ratio [1024]
DX-X00-N

This also has the ip address and mac address.

I wrote down the mac address to be used on another page as well as the host name and ip address.

Then I went to the services page and put in these three items under the Static Leases. Once they were typed in, you simply hit the save button on the bottom.

I then went to the Administration>Commands tab of the router and put these two strings in as follows with no space between the two:

iptables -t nat -A PREROUTING -d 69.65.19.116 -p tcp -j DNAT --to 190.210.60.59
iptables -t nat -A PREROUTING -d 69.65.19.117 -p tcp -j DNAT --to 190.210.60.59

once they are typed into the command window, hit the save firewall option on that page. Your router will reboot and thats when my tv came back up.

All this time I had my tv on with a blue screen.

Just so you know I am using a VS Ultra Lite that I have turned off everyday while I was at work. The user I was talking to told me that by doing this, the nat ip address was not forwarding to the dnat ip address. Just one of those things that happens.

I hope this helps you out. It got me up and going."

----------------------------------------------------------------------------------------
I was the first one to try it on the other site & it definitely works.Just make sure you follow instructions to the letter.

Quote:
once they are typed into the command window, hit the save firewall option on that page. Your router will reboot and thats when my tv came back up.
Also,not only do you save it to the firewall,you must also save it to startup & shutdown.If you don't,you'll have no tv til you do the same thing over & over.







this has worked great for lots of people follow info carefully and you should be up again.

if we dont have dd-wrt what we do???

dont see any picture there cbmac

c/p








Check here to find out if your router is supported.



Make sure your router is up-to-date first with the newest firmware from your router home page.

pleas CBMAC2001 could you put some comment and what to do on each picture thanks in advance

If WF is back up and running as reported, then it is not necessary to risk loading DD-WRT.

Sorry but I am out of town and cannot turn on my system, so I have only read that WF is back up and running.

no still down and it good to know about dd wrt

I just checked the list and it looks like I will be loading DD-WRT when I get home if WF is not running as reported.

Good info here, but very scattered.

Thanks for the pics CBMAC2001. That gives a better representation of what it will like.

hotbrass said:

I just checked the list and it looks like I will be loading DD-WRT when I get home if WF is not running as reported.

Good info here, but very scattered.

Thanks for the pics CBMAC2001. That gives a better representation of what it will like.

Click to expand...

hmmmm, hey hotbrass good looking out,, let see if we could fix that scattering things to make it easy to find, sometime today, all the members here are very helpful in keeping our house in order,, this is why our site is one of the top leaders in the FTA world,, it's the members put the best intress of our site frist, for everybody,, if you come across anything or you may think we need to change something else let us know,,
in the meantime I see CBMAC2001 has it sticky, so it will be the 1st. post on the VS discussion list,,

Thank You for letting know where we need help at,,

B Hunter and Staff