shrek_88

New member
vs pro, i have 110 and 119 i can watch 110 when i change the channel to 119 i have to power it off and then on to view the channel. want to know if it should be like that.
thanks in advance
 

CASPER

New member
It all depends on your set up ............need more info...



Tips to remember when asking for help in the forums:


When asking a question,you should follow these minimum requirements

1.What Satellites you are aiming at.
2.Your Receiver Brand/Model
3.What version of software you have loaded on it,
("the latest version" is NOT an acceptable answer)
4.What dish and lnb type you have.
("a plain lnb" is not a proper answer)
5.Any switches you have inline. (name the brand/type)
6.What settings you currently have setup.
7.What you have tried so far(Detailed steps)
8.Other things pertinent to your specific question
may also be needed and included.


To post a reply you must follow these guidelines

1. Your answer must be pertinent to the originators question.
(do not answer a question posted by someone else in this thread,(dont reply to hijacker)
2.No bashing the member or question. (we were all newbies at one time)
3.Do not reply to a hijackers question.
4.Post no files in discussion area.You may post a link to a file you
upload in the proper files section.


A properly stated question would look something like this.

I am running a Viewsat Extreme with version 070522x software loaded.
I have a dish500 with a twin Dp lnb.
I have 119 set on diseqc port1 with LNB selected as OCS-DP
and 110 on port2 again OCS-DP selected.
no other switches inline.
My question is,why cant I get 91 when i select it from the list?

Following this template will greatly increase the chances of a solution!
 

Beware Beware

PreferredByPete.com Enthusiast
vs pro, i have 110 and 119 i can watch 110 when i change the channel to 119 i have to power it off and then on to view the channel. want to know if it should be like that.
thanks in advance

It sounds like your Disqe switch needs to be changed although I have been wrong before but it is a problem I've seen before I would give this a try
EMP-Centauri > PROFi Line <
4x1 DiSEqC Switch (Weatherproof)

The Cadillac of Diseqc switches. Allows you to combine four satellites into one FTA receiver. Switch is designed and manufactured in Europe, comes in protective industrial grade plastic weatherproof housing.

Switch is covered under warranty 4 years by the original manufacturer from the date of production.
 

Beware Beware

PreferredByPete.com Enthusiast
And by the way this is the wrong section for Veiwsat this is Visionsat Discussions it will help in the future to post in right section .............. Cheers
 
Top