CASPER
New member
Ariza XTREME Loader Step-by-Step Setup
>> Download/Save xtreme_uploader.zip
>> Download/Save latest update
>> Extract All with WinZIP (or similar)
>> Run setup.exe
>> Complete the installation
>> Go to "Start>Program Files>Upgrade>upgrade"
>> Make sure settings are: MODE - DownLoad; TYPE - Prog, Data; Serial Port - COM1 or COM2 (Depends on your setup), and that you have a NULL MODEM SERIAL Cable connected to STB & PC.
>> STB - OFF (Power switch at the back of the unit)
>> Click Browse, (make sure to change to *.sgn instead of *.bin in the Browse window) find and select the latest update(.sgn)
>> Click Open
>> Click Start
>> Power on the STB (Power switch at the back of the unit)
>> Let it upload
>> Let it reboot
>> Wait until it passes INIT stage
>> Disconnect from PC
>> Connect to TV
>> Connect the Satellite Signal
>> Power on the unit.
>> Wait until it passes INIT stage.
>> Setup your dish settings.
>> Enjoy TV !
USE @ UR OWN RIXK
>> Download/Save xtreme_uploader.zip
>> Download/Save latest update
>> Extract All with WinZIP (or similar)
>> Run setup.exe
>> Complete the installation
>> Go to "Start>Program Files>Upgrade>upgrade"
>> Make sure settings are: MODE - DownLoad; TYPE - Prog, Data; Serial Port - COM1 or COM2 (Depends on your setup), and that you have a NULL MODEM SERIAL Cable connected to STB & PC.
>> STB - OFF (Power switch at the back of the unit)
>> Click Browse, (make sure to change to *.sgn instead of *.bin in the Browse window) find and select the latest update(.sgn)
>> Click Open
>> Click Start
>> Power on the STB (Power switch at the back of the unit)
>> Let it upload
>> Let it reboot
>> Wait until it passes INIT stage
>> Disconnect from PC
>> Connect to TV
>> Connect the Satellite Signal
>> Power on the unit.
>> Wait until it passes INIT stage.
>> Setup your dish settings.
>> Enjoy TV !
USE @ UR OWN RIXK