capacitors

The Threat is Seriously, Experts Warn Space weather could pose serious problems here on Earth in the coming years, the chief of the National Oceanic and Atmospheric Administration (NOAA) said Saturday (Feb. 19). A severe solar storm has the potential to take down telecommunications and...

-------------------------------------------------------------------------------- How to correctly reboot your SATZEN Z300 system (in 7 magic steps) There are a lot of posts kicking around, concerning IKS enabled units losing their IP's ect and or getting disconnected from the 'net' and being...

How to correctly reboot your IKS based system (in 7 magic steps) There are a lot of posts kicking around, concerning IKS enabled units losing their IP's ect and or getting disconnected from the 'net' so I thought that those having this type of issue, might benefit from knowing the correct...

I have a pc with Intel p55 M/B with1GB integrated VGA. I want to upgrade this video card to an ATI Radeon. Can I do it?If not can I install a Nvidia on this Motherboard?

Sometimes stuck on Booting sometimes front panel screen is blank. Tried unplugging everything then holding power button while switching on and nothing. Any suggestions If factory file needs to be loaded again via RS232 Cable how do you do this? Is some kind of loader program needed?

Asus has long had a notable reputation within the overclocking community and their P6T Deluxe motherboard continues the trend. Based on Intel's X58 Express and ICH10R chipsets, this ATX board is ready to host the newest LGA1366 Core i7 processors for ultimate powerful performance. Up to 24GB of...

I am trying my very first electronics project -- building a small and supposedly simple "crackerbox guitar amp" from a schematic and plans I found online. The schematic calls for a 0.047uF capacitor, but the guy at RadioShack said he thought that was a misprint and gave me a 0.0047uF capacitor...

I'm here by invitation from another member. Not a complete newbie but I'll admit there's more to be learned. In general I've enjoyed electronics as a hobby since the late '60s. Let's see what I can bring to the table.

There was a little "incident" at your house today while you were gone. Please allow me to explain: I was watching T.V. and I heard this beeping going off in the kitchen. The first thing I thought of was the smoke detector going off so I ran into the kitchen and checked everything out. By the...

How to 3500 Capacitor Replacement Guide

Hi there guys. I have a little problem. I was hooking up my fta box and vcr to the tv and messed up... The cable 'out to tv' I screwed it into the wrong hole, the hole below the lnb in. (the hole 'if out') After about 2 min waiting for the box to boot a tiny puff of smoke came out. I...

Re: Can I fix my dead Pansat 3500SD without a JTag cable? Hello all friends, My pansat 3500sd has no green light (power) when i turn on, i used (Jtag cable), i opened (Skymax2.2) and clicked start it always appeared... Init jtag ID code:FFFFFFFF Fail DCU, please restart...

I'll try to explain this as best as I can. Tried to update friends box (cw700). First tried the remote, didn't work, so i used the front of the box to pan through usb to flash. The box took the update (what I didn't realize is, this box was not serial verified yet) and now the box is stuck on...

This is my first post so before i post any question i did some searching to make sure this question wasn't ask already. My question is last week my dad unplugged the CS6000 power cord while it was still on then when i tried to turn it on only a little read light flashes on the display and that's...

I was trying out old files last night before the new fix came out and when i loaded 415 bin i got it to work then the picture froze but still had volume then the tv screen went green so i powered down from the back when i powered back up i have nothing now can someone tell me what happened?

3500 Illustrated C13-C14 Capacitor Replacement.doc and Pansat Power supply Schematic.zip

Fixing a dead CS5000 or CS6000. If you have a CS5000 or 6000 with the following issues: 1. No power on the front display or 2. Front display lights seem fading or dim symptoms. The steps to follow to fix the problem is as follows: 1. Disconnect the receiver from the AC outlet as well any...

I really need some help with this... My first reaction was to swap out the power supply with my pansat 2500 but I read about doing a JTAG? I'm not sure exactly what to do. I need some help! There is no LEDs or signs of power on my box. It is COMPLETELY dead.

Hi, I have a Pansat 2700A receiver that I use for FTA. It has a hardware problem in that it is able to move the Diseqc 1.2/Usals motor no problem; But, it does not receive signal on any sat on any transponder- FTA channels don't work. It sees the transponders as it is scanning because it stops...

How to Bypass BIOS Passwords BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if...