CASPER
New member
Aux Card Bins
Use this bin if you want to add an AUX'd Rom 102 or Rom 103 card to the STB.
Requires an open and preferably cleaned card inserted in the STB... the STB will do the rest.
Best to load the factory bin first... This is the original factory bin and it is also used for all files since file 140.
Quote:
Credit: Magnum-x
This file allows you to program the AUX solution to an unlocked 102 card using the all ready built in card reader without the need of buying an extra ISO.
With a unlocked 102 card inserted into your Magnum box follow these instructions to the letter.
1. LOAD FILE - XV3300v111 - TO MAGNUM as usual (start the X-Down software, select the file, then power ON the Magnum via the Switch at the back of the unit). Wait for it to say "GOOD" on the front of the Magnum, then Power OFF, wait 10 secondfs, then Power ON via the switch at the back). Then power on with the remote.
2. Press MENU on the remote control
3. Move cursor to “EMBEDDED CAS”
4. Move to option “SMART CARD"
5. Press "OK"
6. Press the Red Button on the remote control to write to the unlocked 102 card.
You will see in the lower right hand corner - "SC ROM 102 Upgrade", then "---Success---".
Use this bin if you want to add an AUX'd Rom 102 or Rom 103 card to the STB.
Requires an open and preferably cleaned card inserted in the STB... the STB will do the rest.
Best to load the factory bin first... This is the original factory bin and it is also used for all files since file 140.
Quote:
Credit: Magnum-x
This file allows you to program the AUX solution to an unlocked 102 card using the all ready built in card reader without the need of buying an extra ISO.
With a unlocked 102 card inserted into your Magnum box follow these instructions to the letter.
1. LOAD FILE - XV3300v111 - TO MAGNUM as usual (start the X-Down software, select the file, then power ON the Magnum via the Switch at the back of the unit). Wait for it to say "GOOD" on the front of the Magnum, then Power OFF, wait 10 secondfs, then Power ON via the switch at the back). Then power on with the remote.
2. Press MENU on the remote control
3. Move cursor to “EMBEDDED CAS”
4. Move to option “SMART CARD"
5. Press "OK"
6. Press the Red Button on the remote control to write to the unlocked 102 card.
You will see in the lower right hand corner - "SC ROM 102 Upgrade", then "---Success---".