CASPER
New member
f Your Coolsat 5000 Won't Load a Bin TRY THIS Force Flash Proceedure
If your Coolsat 5000 won't load, Powers off and on, Knightrider Syndrome or you get a message "Connect your reciever and turn it on" Try This;
Force Flash Proceedure
The force flash is an easy procedure, it can be time consuming in getting it right. This may take several attempts, timing this right is critical.
Load the Factory BinV.100 to the Coolsat Pro Loader, have the switch on the back of the unit turned to off.
Then just as you hit connect, flip the back switch on a split milli-second later.
When you do it just right it will load the factory bin.
Coolsat 5000-Bin V.100- file needs to be unzipped and saved, this is the stb file the Proloader requires.
**This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing up to 100%.
* When complete, power off the receiver.
* Disconnect the receiver from PC
* Reconnect the receiver to your TV and turn power switch on.
* Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK
* When factory set is complete (language option screen appears), power off receiver and disconnect from TV.
* Reconnect receiver to PC and switch power back on
* Open up Coolsat Pro Loader File
* Using browse option, locate and select from your folder the new STB file.
If you have been loading any customized saved channel lists or key files, don't reload them, they may be causing the corruption.
eg. Coolsat 5000-159-STB Once again, you will see the new files loading to 100% and old files erasing to 100%.
* When complete, power off the Coolsat and disconnect from PC
* Reconnect to TV and switch power back on.
* Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK
* When Factory Set is complete, return to main menu.
* In main menu select Installation, then Auto Scan. You will then need to select (example) 91.0W Nimiq as the satellite, and then select OK to run the scan.
* Once complete, exit from Main Menu.
* Watch TV J
*Before connecting or disconnecting the receiver to or from the TV/ PC, you must ensure the power switch on the back of the receiver is turned OFF!!!
If your Coolsat 5000 won't load, Powers off and on, Knightrider Syndrome or you get a message "Connect your reciever and turn it on" Try This;
Force Flash Proceedure
The force flash is an easy procedure, it can be time consuming in getting it right. This may take several attempts, timing this right is critical.
Load the Factory BinV.100 to the Coolsat Pro Loader, have the switch on the back of the unit turned to off.
Then just as you hit connect, flip the back switch on a split milli-second later.
When you do it just right it will load the factory bin.
Coolsat 5000-Bin V.100- file needs to be unzipped and saved, this is the stb file the Proloader requires.
**This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing up to 100%.
* When complete, power off the receiver.
* Disconnect the receiver from PC
* Reconnect the receiver to your TV and turn power switch on.
* Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK
* When factory set is complete (language option screen appears), power off receiver and disconnect from TV.
* Reconnect receiver to PC and switch power back on
* Open up Coolsat Pro Loader File
* Using browse option, locate and select from your folder the new STB file.
If you have been loading any customized saved channel lists or key files, don't reload them, they may be causing the corruption.
eg. Coolsat 5000-159-STB Once again, you will see the new files loading to 100% and old files erasing to 100%.
* When complete, power off the Coolsat and disconnect from PC
* Reconnect to TV and switch power back on.
* Using the remote, select System Setting in the main menu, in the submenu select Database Reset, and then Factory Set, Press OK
* When Factory Set is complete, return to main menu.
* In main menu select Installation, then Auto Scan. You will then need to select (example) 91.0W Nimiq as the satellite, and then select OK to run the scan.
* Once complete, exit from Main Menu.
* Watch TV J
*Before connecting or disconnecting the receiver to or from the TV/ PC, you must ensure the power switch on the back of the receiver is turned OFF!!!
