[Question?] New To Neusat?
- Thread starter Donut
- Start date
ricklbert
Moderator
How to NeoSat IPro 2000 Plus Backup & Restore
After install a Neosat IPro 2000 Plus..
You go through setup wizard & have it up and running..
Do this to Create a Backup so you can Restore without having to do setup again
after doing a Factory Default..
Now for Backup after Installation Wizard finishs.
Menu
Installation
User Data Manger
Extract User Data
Give time to do it's thing.
This will extract a file to usb stick to create a backup file.
user_data.udt
Now for Restore after doing a Factory Default.
When Installation Wizard starts cancel out..
Menu
Installation
User Data Manger
Update User Data
This fine file on USB Stick automatic
user_data.udt
& do Restore..
Then receiver will reboot and do EPG Guide.
Then enjoy tv.
Also
How To Update Ipro 2000
Updating the bin file is “EASY” just drag the file onto a USB Flash drive then plug it into the usb port of the ipro.. a message window pops up.. just select okay to update.. and it starts updating. BTW the screen must count to 100% twice…
The old fashion way!
[HOW TO]
- 1. OPEN SERIAL PORT (Select the correct com and click open)
- 2. SELECT FILE TO USE (Use the (…) button next to file and browse for newest bin)
- 3. TURN OFF YOUR BOX
- 4. CLICK UPGRADE SOFTWARE BUTTON
- 5. TURN ON YOUR BOX (updater will start at this point)
Remember the loader must count to 100 twice… Please wait for the message “Good” to show up on the display of the iPro2k.
Recommendation do a factory set after loading the new software…Oh yea don’t worry about it if you have original dish stuff (switches, lnbs , ect…) setup is automatic -=)